KV-29FX60A - Sony TV Service Manual (repair manual). Page 10

The following chapter contains all the steps necessary when first installing your TV and
the basic TV functions.

Connect the TV set to the mains socket (220-240 V. AC, 50 Hz).

Connect a conventional aerial cable to the socket marked 

˘ M on the rear of the TV set.

or

Connect your Satellite Receiver to one of the Scart connectors  

J K L of the TV set.

When connecting a VCR to your TV set:
We recommend that you use the preset function Manual Programme Preset (page 33) to tune
in the VCR signal to programme position 0.

First Time Operation

Make sure to insert the batteries using the correct polarities.
Dispose of exhausted batteries according to your local regulations.

•

Press the switch 

U E at the front of the TV set.

If the standby mode indicator 

u D on the TV is lit, press TV I/

u 1

 on the

Remote Control to switch on the TV set.

R/D/D/D

L/G/S/I

R/D/D/D

L/G/S/I

OUT IN

VIDEO

SAT

E

D

First Time Operation

Your TV uses an on-screen menu system to guide you through the operations.

Use the following buttons on the Remote Control to operate the menu system:

•

Press MENU 

!™ to switch the menu on and off.

•

Use 

“, ”, 4, $ of the joystick !¡ to select within the menu system.

•

Press OK to store.

•

When menu is switched off:
Press 

“ to return to the last menu screen.

•

Push the joystick 

!¡ to ”.

After all available channels are stored, the TV goes back to the programme
position with which you started the automatic tuning. Your TV is now ready
for use.

ϖ

To stop the automatic tuning: Press OK 

!¡.

ϖ

If you wish to change the sequence of the stored channels,  go to
Sorting Programme Positions in Advanced Presetting.

ϖ

If you need to change or repeat the tuning afterwards (e.g. when you move
house) : select the menu Auto Tuning in the Set Up 

  menu.

Press the MENU 

!™ button.

The menu Language/Country appears on the screen.

Push the joystick 

!¡ to ”. Push the joystick !¡ to $ to select the language.

Press OK 

!¡.

The menus appear in the selected language.

Push the joystick 

!¡ to $ to select Country. Push the joystick !¡ to ”.

Select the country in which you will operate the TV set using 

$ or 4.

Confirm by pressing OK 

!¡.

The menu Auto Tuning appears.

Language/Country

Language

Country

Select:

Enter:

English

Off

Language/Country

Language

Country

Select:

Enter:

Language/Country

Language

Country

Select Country:

Confirm: OK

English

Off

Austria

Belgium
Bulgaria

Czech Rep.

Denmark

Finland

English

Off

Set Up

Auto Tuning

Programme Sorting
AV Preset
Installation

Select:

Start Auto Tuning:

Start

1
2
3
4
5

CO2
CO3
CO4
CO7
CO8

Searching