Read Sony KV-29FS60A Service Manual online
10
31
First Time Operation
Step 2 Basic Presetting
A The Menu System
Your TV uses an on-screen menu system to guide you through the operations.
Use the following buttons on the Remote Control to operate the menu system:
Use the following buttons on the Remote Control to operate the menu system:
•
Press MENU !™ to switch the menu on and off.
•
Use “, ”, 4, $ of the joystick !¡ to select within the menu system.
•
Press OK to store.
•
When menu is switched off:
Press “ to return to the last menu screen.
Press “ to return to the last menu screen.
C Automatic Tuning In of Channels
•
Push the joystick !¡ to ” for more than 2 sec..
After all available channels are stored, the TV goes back to the programme
position with which you started the automatic tuning. Your TV is now ready
for use.
After all available channels are stored, the TV goes back to the programme
position with which you started the automatic tuning. Your TV is now ready
for use.
v
To stop the automatic tuning: Press OK !¡.
v
If you wish to change the sequence of the stored channels, go to
Sorting Programme Positions in Advanced Presetting.
Sorting Programme Positions in Advanced Presetting.
v
If you need to change or repeat the tuning afterwards (e.g. when you move
house) : select the menu Auto Tuning in the Set Up
house) : select the menu Auto Tuning in the Set Up
menu.
1
Press the MENU !™ button.
The menu Language/Country appears on the screen.
The menu Language/Country appears on the screen.
2
Push the joystick !¡ to ”. Push the joystick !¡ to $ to select the language.
Press OK !¡.
The menus appear in the selected language.
Press OK !¡.
The menus appear in the selected language.
3
Push the joystick !¡ to $ to select Country. Push the joystick !¡ to ”.
4
Select the country in which you will operate the TV set using $ or 4.
Select Off if you wish an automatic tuning without ACI (fast presetting with a
given channel sequence).
Select Off if you wish an automatic tuning without ACI (fast presetting with a
given channel sequence).
•
Confirm by pressing OK !¡.
The menu Auto Tuning appears.
The menu Auto Tuning appears.
B Selecting Language and Country
Language/Country
Language
Country
Select:
Enter:
English
Off
Language/Country
Language
Country
Select:
Enter:
Language/Country
Language
Country
Select Country:
Confirm: OK
English
Off
Austria
Belgium
Bulgaria
Bulgaria
Czech Rep.
Denmark
Finland
English
Off
Set Up
Auto Tuning
Programme Sorting
AV Preset
Installation
AV Preset
Installation
Select:
Start Auto Tuning:
Start
1
2
3
4
5
2
3
4
5
CO2
CO3
CO4
CO7
CO8
CO3
CO4
CO7
CO8
Searching
35
B Connecting the TV Set
1
Connect the TV set to the mains socket (220-240 V. AC, 50 Hz).
2a
Connect a conventional aerial cable to the socket marked ˘ M on the rear of the TV set
or
or
2b
Connect your Satellite Receiver to one of the Scart connectors J K L of the TV set.
When connecting a VCR to your TV set:
We recommend that you use the preset function Manual Programme Preset (page 38) to tune
in the VCR signal to programme position 0.
We recommend that you use the preset function Manual Programme Preset (page 38) to tune
in the VCR signal to programme position 0.
First Time Operation
Installation
C Inserting the Batteries into the Remote Control
Make sure to insert the batteries using the correct polarities.
Dispose of exhausted batteries according to your local regulations.
Dispose of exhausted batteries according to your local regulations.
D Switching on the TV Set
•
Press the switch U E at the front of the TV set.
If the standby mode indicator u D on the TV is lit, press TV I/u 1 on the
Remote Control to switch on the TV set.
Remote Control to switch on the TV set.
R/D/D/D
L/G/S/I
R/D/D/D
L/G/S/I
OUT IN
VIDEO
SAT
E
D
Click on the first or last page to see other KV-29FS60A service manuals if exist.