KV-29FQ60K - Sony TV Service Manual (repair manual). Page 12

Depending on your country selection B/G/H, D/K, L , I

PAL, SECAM 
NTSC 3.58, 4.43 (Video In only)

VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER:

S21-S41

D/K:

R1-R12, R21-R69

Flat display FD Trinitron    29” (Approx. 73 cm measured diagonally)

1/

21-pin Scart connector (CENELEC standard) including audio/
video input, RGB input, TV audio/video output

  

2/

21-pin Scart connector (CENELEC standard) including audio/

video input, RGB input, selectable audio/video output and
Smartlink interface

 

Audio outputs (Left/Right) - phono jacks

S Video input - 4 pin DIN

Video input - phono jack

Audio input - phono jacks

 

i 

Headphones jack

2 x 20W (Music Power), 2 x 10W (RMS)

113W

0.3W

Approx. 788mm x 604mm x 520mm

Approx. 48.5Kg  

1 Remote Control (RM-947), 2 batteries (IEC designated)

• 100Hz picture
• Teletext, Fastext, TOPtext (250 page TEXT memory)
• Sleep Timer
• Smartlink (direct link between your TV set and a compatible VCR. For more

information on Smartlink, please refer to the Instruction Manual of your VCR)

• TV system Autodetection
• Dolby Virtual
• BBE

 

S

 

This symbol on the product or on its packaging indicates that this product shall not be treated as 
household waste. Instead it shall be handed over to the applicable collection point for the recycling of 
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help 
prevent potential negative consequences for the environment and human health, which could 
otherwise be caused by inappropriate waste handling of this product. The recycling of materials will 
help to conserve natural resources. For more detailed information about recycling of this product, 
please contact your local Civic Office, your household waste disposal service or the shop where you 
purchased the product.

Here are some simple solutions to problems which may affect the picture and sound.

No picture (screen is dark), and no sound.

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of

the TV.

• If the standby indicator 

 is on press the 

 button

or a numbered button on the remote control.

Poor or no picture (screen is dark), but good
sound.

• Using the MENU system, select the “Picture

Adjustment“ display and select “RESET“ to return to
the factory settings.

No picture or menu information from equipment
connected to the Scart socket.

• Check that the optional equipment is on, and press

the 

 button of the remote control repeatedly until

the correct input symbol is displayed on screen.

Good picture, no sound.

• Press the 

 button on the remote control.

• Check that “TV Speakers” is “On” in the “Detail Set

Up” menu.

• Check the Headphones are not connected.

No colour on colour programmes.

• Using  the  MENU  system,  select  the  “Picture

Adjustment“ and select “RESET“ to return to the
factory settings. 

Distorted picture when changing programmes or
selecting Teletext.

• Turn off any equipment connected to the scart

connectors on the rear of the TV.

Wrong characters appear when viewing teletext.

• Using  the  menu  system,  display  the  “Language/

Country” menu and select the country in which you
are operating the TV set.
For Cyrillic languages, we recommend you select
Russian as the country if your own country does not
appear in the list.  

Picture slanted.

• Using the menu system, select the “Picture Rotation”

option in the “Detail Set Up” menu to correct the
picture slant.

Snowy picture when viewing a TV channel.

• Using  the  menu  system,  select  the  “Manual

Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.

• Using the menu system, select the “Noise Reduction”

option in the “Detail Set Up” menu and select “Auto”
to reduce the noise in the picture.

No unscrambled picture whilst viewing un
unscrambled channel with a decoder connected
through the scart connector 

2/

2.

• Using the menu system, display the “Set Up” menu.

Then select the “Detail Set Up” option and set “AV2
Output” to “TV”.

• Check that the decoder is not connected to the 

1/

1 scart socket.

Remote control does not function.

• Replace the batteries.

The standby indicator 

 on the TV flashes.

• Contact your nearest Sony service centre.