KV-28WX2A - Sony TV Service Manual (repair manual). Page 21

— 21 —

GRN

BLU

RED

Fig.3-4

Fig.3-5

1.

Input a dot signal from the pattern generator. Normalize the
picture setting.

2.

(Moving horizontally), adjust the H.STAT control so that
the horizontal red, green and blue dots coincide at the
center of screen.

3.

(Moving vertically), adjust the V.STAT magnet so that the
vertical red, green and blue points coincide at the center of
screen.

• If the horizontal dots are unable to coincide with the

variable range of the H.STAT convergence, adjust together
with the V.STAT convergence while tracking.
(Adjust the convergence by tilting the V.STAT convergence
or by opening or closing the V.STAT convergence.)

(Open)

(Close)

2By rotating the V. STAT magnet counterclockwise, the

red, green and blue dots move as shown below.

4. Movement of the red, green and blue dots by tilting the

V.STAT magnet and by opening or closing the V.STAT
magnet.

1 By opening or closing the V.STAT magnet, the red, green

and blue points move as shown below

Deflection yoke positioning
corrects these areas

Purity control corrects
this area.

Disk magnets or
rotatable disk
magnets correct
these areas (a-d).

RV701
Screen (G2)

Blue

Red

Green

V.STAT

Magnete statico verticale

H.STAT

convergence

control

RV704 (H.STAT)
H.STAT convergence

C Board

B

G

R

B

G

R

B

G

R

V.STAT Magnet