KV-28LS36B - Sony TV Service Manual (repair manual). Page 8

The Auto Tuning menu appears on the screen. Press the

  OK button to select Yes.

The TV starts to automatically search and store all

  available broadcast channels for you. 

 This procedure could take some minutes. Please be

 

 patient and do not press any buttons, otherwise the

 

 automatic tuning will not be completed.

If no channels were found during the auto tuning 
process then a new menu appears automatically on 
the screen asking you to connect the aerial. Please 
connect the aerial (see page 6) and press OK. The 
auto tuning process will start again.

After all available broadcast channels are captured 
and stored, the Programme Sorting menu appears 
automatically on the screen enabling you to change 
the order in which the broadcast channels appear on 
the screen.

If you wish to keep the broadcast channels in the 
tuned order, go to step 7.

If you wish to store the broadcast channels in a

 

different order:

1 Press the

or

button to select the programme 

number with the broadcast channel you wish

 

to rearrange, then press the

button. 

2 Press the

or

button to select the new

programme number position for your selected

 

broadcast channel, then press 

. 

3 Repeat steps b)1 and b)2 if you wish to change 

the order of the other broadcast channels.

Press the MENU button to remove the menu from the

  screen.

No channel found

Please connect aerial

Confirm

OK

  Programme:                   01
  Channel:                      C21

Auto Tuning

  Searching...

 Programme Sorting

Select channel:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   06     C58

OK

 Programme Sorting

Select new position:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   

06     C58

         05       C27

OK

Do you want to start 

automatic tuning?

Yes

No

OK

OK

OK

OK

OK

Language

Select Language:

 i

4

Svenska
Norsk
English
Nederlands
Français
Italiano

 i

$  

OK

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

OK

OK

OK

The first time you switch on your TV, a sequence of menu screens appear on the TV ena-
bling you to: 1) choose the language of the menu screen, 2) adjust the picture slant 3) search 
and store all available broadcast channels and 4) change the order in which the broadcast 
channels appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by 
selecting the appropriate option in the 

 (Set Up menu) or by pressing the Auto Start Up 

Button 

 on the TV set. 

continued...

Connect the TV plug to the mains socket (220-240V AC, 
50Hz)
The first time the TV set is connected, it is usually turned 
on. If the TV is off, press the 

 on/off button on the TV 

set to turn on the TV.
The first time you switch on the TV, a Language menu 
displays automatically on the TV screen.

Press the 

or

button on the remote control to select 

the language, then press the OK button to confirm your 
selection. From now on all the menus will appear in the 
selected language. 

Because of the earth’s magnetism, the picture might slant. 
The Picture Rotation menu allows you to correct the 
picture slants if it is necessary.

  If it is not necessary, press

or

to select Not 

 and press OK.

If it is necessary, press

or

to select Adjust now, 

then press OK and correct any slant of the picture 
between –5 and +5 by pressing

or

. Finally press 

 to store.

The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.