Read Sony KV-28FQ75A Service Manual online
12
14
Using the TV menu system:
Equaliser Adjustment
Sel:
Adjust:
Confirm:OK
(Personal)
+
0
–
120
500
1,5K
5 K
10 K
Auto Vol. Control
Off
On
Dual Sound
Mono
Stereo
NICAM
Volume
Dual Sound
PAP
Stereo
NICAM
Balance
0
Loudness
Off
On
Space
Off
On
Audio Adjustment
Equaliser Mode
Equaliser
Adjustment
Adjustment
Balance
Loudness
Space
Auto Vol. Control
Dual Sound
Volume
Dual Sound
Loudness
Space
Auto Vol. Control
Dual Sound
Volume
Dual Sound
Stereo
Off
Off
Stereo
Select Mode :
Off
Confirm: OK
Personal
Vocal
Jazz
Rock
0
NICAM
NICAM
Sound Control
Item
Effect/Operation
Equaliser Mode
V
Personal
Vocal
Jazz
Rock
Pop
Vocal
Jazz
Rock
Pop
v
Flat (fixed setting, cannot be adjusted)
Equaliser adjustment
You can adjust the mode selected in Equaliser mode by
cutting and boosting the 5 selected frequency bands.
Press
cutting and boosting the 5 selected frequency bands.
Press
b or B to select the frequency band then V or v to
adjust the frequency. Finally, press the OK button to store
the new adjustment.
the new adjustment.
If you want to store the new setting, you need to set the Equaliser mode to
‘Personal’. Personal mode permanently stores the setting, all other modes (Vocal,
Jazz, Rock, Pop) store only until the next mode change.
‘Personal’. Personal mode permanently stores the setting, all other modes (Vocal,
Jazz, Rock, Pop) store only until the next mode change.
Balance
b More
left
B
More right
Loudness
V
Off:
Normal
v
On:
For music broadcasts
Space
V
Off:
Normal
v
On:
Special acoustic effect
Auto Vol. Control
V
On: Volume level of the channels will stay the same
independent of the broadcast signal (eg in the case of
advertisements)
independent of the broadcast signal (eg in the case of
advertisements)
v
Off: Volume level changes according to the broadcast
signal.
signal.
Dual Sound
For a bilingual broadcast:
V
V
A for channel 1
v
B for channel 2
For a stereo broadcast:
V
V
Mono
v
Stereo
When NICAM stereo is being broadcast, the indication NICAM appears briefly on
the screen.
the screen.
Headphones
i Volume
i Volume
Adjusts headphone volume.
Can also adjust the volume level of additional equipment
connected to the RCA sockets on the rear of the TV.
Can also adjust the volume level of additional equipment
connected to the RCA sockets on the rear of the TV.
i Dual Sound
Only available when PAP feature is selected:
V
V
Stereo: The sound of one screen comes through both
the TV loudspeakers and the headphones.
v
PAP:
The sound of the left screen comes through
the TV loudspeakers, the sound of the right
screen is selectable via headphones.
the TV loudspeakers, the sound of the right
screen is selectable via headphones.
For more detail on PAP, refer to the ‘Operating PAP’ section of this manual.
15
Using the TV menu system:
Using the Features menu
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the
v or V buttons to select
for the ‘Features’ menu then press
B to enter the ‘Features’
menu.
3. Press the
v or V buttons to select the desired menu item then press B to confirm. For a description
of the menu items and their effects, see the table below.
4. Press the
v, V, B or b buttons to select the desired setting.
5. Press the OK button to confirm your choice of setting.
6. Repeat steps 3-5 if you wish to select any of the other items.
7. Press the MENU button to remove the menu from the TV screen.
6. Repeat steps 3-5 if you wish to select any of the other items.
7. Press the MENU button to remove the menu from the TV screen.
Item
Effect/Operation
Auto Format*
V Off:Size of picture does not automatically adjust.
*only for aerial signal
Normal:Size of picture automatically adjusts according to
information from the broadcaster.
v Full:
The TV will automatically adjust the picture size to eliminate any
dark areas on the TV picture (as shown below):
dark areas on the TV picture (as shown below):
Format Correction*
V Off: 4:3/14:9 is selected
(*only if Auto Format is
v On: Smart mode is selected automatically for 4:3/14:9 broadcasts
set to ‘Normal’ or ‘Full’)
Sleep Timer
You can select a time after which the TV switches itself into
standby mode.
V Off
standby mode.
V Off
v 90 min
Parental Lock
V Off: No parental lock.
v On: This feature disables the TV buttons when the set is in standby mode.
It is only possible to switch the set back on by pressing a button on
the remote control.
the remote control.
AV2 Output
V TV audio/video signal from the aerial
AV1 audio/video signal from scart 1
AV2 audio/video signal from scart 2
AV3 audio/video signal from scart 3
AV2 audio/video signal from scart 2
AV3 audio/video signal from scart 3
v AV4 audio/video signal from connectors on front of the TV
Changing the screen size
This feature allows you to change the size of the TV picture.
Press the
button on the remote control repeatedly or use the
v or V buttons to select one of the
following formats then press the OK button to confirm your selection:
Smart
imitation of wide screen effect for 4:3 broadcasts.
4:3
conventional 4:3 picture size, full picture information.
14:9
compromise between 4:3 and 16:9 picture size.
Zoom
widescreen format for letterbox movies
Wide
for 16:9 broadcasts.
In Smart, Zoom and 14:9 modes parts of the top and bottom of the screen are cut off. Press
v or V to adjust
the position of the image on screen (eg to read subtitles) then press the OK button to confirm.
10 min
Sleep Timer
Parental Look
Off
On
AV 2 Output
TV
AV 1
AV 2
AV 3
AV 4
AV 3
AV 4
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV 2 Output
Parental Lock
AV 2 Output
Off
Off
TV
Select:
Enter:
Off
On
Format Correction
Off
On
Auto Format
Off
Normal
Full
Smart
Wide
Zoom
14:9
4:3
Click on the first or last page to see other KV-28FQ75A service manuals if exist.