Read Sony KV-28EW20B Service Manual online
- 12 -
20
Specifications
TV system:
I
I
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
lI: UHF B21-B69
lI: UHF B21-B69
Picture Tube:
Flat Display FD Trinitron WIDE
28” (approx. 71 cm. measured diagonally)
Flat Display FD Trinitron WIDE
28” (approx. 71 cm. measured diagonally)
Rear Terminals
i/
21-pin scart connector
(CENELEC
standard)
including
audio/video
input, RGB input, TV
audio/video output.
i2/r
21-pin
Scart
connector
(SMARTLINK)
(CENELEC standard)
including audio / video input,
S video input, selectable
audio/ video output and
Smartlink interface.
including audio / video input,
S video input, selectable
audio/ video output and
Smartlink interface.
audio outputs (Left/Right) -
phono jacks
phono jacks
Side Terminals
r
3
S Video input – 4 pin DIN
t3
video input – phono jack
o3
audio input – phono jacks
headphones jack
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Sound Output:
2 x 14 W (music power)
2 x 7W (RMS)
2 x 14 W (music power)
2 x 7W (RMS)
Power Consumption:
90 W
90 W
Standby Power Consumption:
0.54 W
0.54 W
Dimensions (w x h x d) :
Approx.796 x 518 x 522 mm.
Approx.796 x 518 x 522 mm.
Weight:
44.5 Kg.
44.5 Kg.
Accessories supplied:
1 Remote Control (RM-887)
2 Batteries (IEC designated)
1 Remote Control (RM-887)
2 Batteries (IEC designated)
Other features:
• Teletext, Fastext, TOPtext
• Sleep Timer
• Smartlink (direct link between your TV set and
a compatible VCR. For more information on
• Teletext, Fastext, TOPtext
• Sleep Timer
• Smartlink (direct link between your TV set and
a compatible VCR. For more information on
Smartlink, please refer to the Instruction Manual
of your VCR).
of your VCR).
• TV system Autodetection.
• Auto Format.
• Auto Format.
Additional Information
21
GB
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark) and no sound.
• Check the aerial connection.
• Plug the TV in and press the
• Plug the TV in and press the
button on the
front of the TV.
• If the standby indicator
is on, press TV
button on the remote control.
Poor or no picture (screen is dark), but good
sound.
sound.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
the factory settings.
the factory settings.
No picture or no menu information from
equipment connected to the Scart connector.
equipment connected to the Scart connector.
• Check that the optional equipment is on and press
the
button repeatedly on the remote control
until the correct input symbol is displayed on the
screen.
screen.
Good picture, no sound.
• Press the
+/- button on the remote control.
• Check that “TV Speakers” is “On” on the Sound
Adjustment” menu.
• Check that headphones are not connected.
No colour on colour programmes.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
factory settings.
Distorted picture when changing programmes or
selecting teletext.
selecting teletext.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
connector on the rear of the TV.
Picture slanted
• Using the menu system, select the “Picture
Rotation” option in the “Detail Set Up” menu to
correct the picture slant.
correct the picture slant.
Noisy picture when viewing a TV channel.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise
• Using the menu system, select the “Noise
Reduction” option in the “Detail Set Up” menu
and select “Auto” to reduce the noise in the
picture
and select “Auto” to reduce the noise in the
picture
No unscrambling or unstable picture whilst
viewing a scrambling channel with a decoder
connected through the Scart connector
viewing a scrambling channel with a decoder
connected through the Scart connector
i2/r.
• Using the menu system, select the “Set Up”
menu. Then enter to “Detail Set Up” option and
set “AV2 Output” to “TV”.
set “AV2 Output” to “TV”.
Remote control does not function.
• Replace the batteries.
The standby indicator
on the TV flashes.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Never open the casing yourself.
!
Additional Information
Click on the first or last page to see other KV-28EW20B service manuals if exist.