Read Sony KV-28DS20U Service Manual online
11
12
Additional TV Features
You have already tuned in all available channels using the ‘Automatically tuning the TV’ section at the start of this manual. If
you need to repeat the tuning procedure however, follow the instructions below and the TV automatically searches and stores all
available channels for you.
you need to repeat the tuning procedure however, follow the instructions below and the TV automatically searches and stores all
available channels for you.
Automatically tuning the TV
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
V
or
v
buttons on the remote control to select
the
symbol on the menu screen then press the
b
button to enter the ‘PRESET’’ menu.
3. Press the
V
or
v
buttons to select ‘Auto Programme’
then press the
b
button to display the autotune menu.
4. Press the
V
or
v
buttons to select ‘YES’ then press the
OK button to confirm.
5. A new menu appears asking you to check that the
antenna is connected. Ensure the antenna is connected
then press the OK button to confirm. The TV starts to
automatically search and store all available channels for
you. Please be patient and do not press any buttons once
this search and store operation has started.
then press the OK button to confirm. The TV starts to
automatically search and store all available channels for
you. Please be patient and do not press any buttons once
this search and store operation has started.
6. When the automatic tuning procedure is complete, the
menu disappears from the TV screen. Press the
PROGR+/- or the numbered buttons on the remote
control to view the TV channels.
PROGR+/- or the numbered buttons on the remote
control to view the TV channels.
Notes: Press the MENU button if you wish to stop the
automatic tuning procedure.
If any digital channels are found during the autotune
procedure, no analogue channels will be stored. If
some channels that you expect to receive are missing,
please refer to the section ‘Manually Tuning the TV’
on page 23 in this manual to tune in and store the
missing channels.
procedure, no analogue channels will be stored. If
some channels that you expect to receive are missing,
please refer to the section ‘Manually Tuning the TV’
on page 23 in this manual to tune in and store the
missing channels.
Yes
No
No
Do you want to start
automatic tuning?
automatic tuning?
Confirm: OK
Please confirm that
antenna is connected
antenna is connected
Confirm: OK
PICTURE CONTROL
Contrast
Reset
FormatFormat
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
13
Additional TV Features
After tuning the TV, you can use this feature to change the channel order.
Re-arranging the TV channels
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
V
or
v
buttons on the remote control to select
the
symbol on the menu screen then press the
b
button to enter the ‘PRESET’ menu.
3. Press the
v
buttons to select ‘Programme Sorting’ then
press the
b
button to enter the ‘PROGRAMME
SORTING’ menu.
4. Press the
V
or
v
buttons to select the channel you want
to move then press the OK button to confirm.
5. Press the
V
or
v
buttons to select the new programme
position (eg PROG 4) for your selected channel then
press the OK button to confirm. The selected channel
now moves to its new programme position and the other
channels move accordingly.
press the OK button to confirm. The selected channel
now moves to its new programme position and the other
channels move accordingly.
6. Repeat steps 4 and 5 if you wish to sort other channels.
7. Press the MENU button to remove the menu from the TV
screen.
PICTURE CONTROL
Contrast
Reset
FormatFormat
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
Click on the first or last page to see other KV-28DS20U service manuals if exist.