Read Sony KV-28CS70B Service Manual online
- 13 -
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.
2-3. Chassis Removal and Refitting
2-2. Service Position
Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set.
rear cover backwards away from the set.
Position the chassis as indicated to access the solder side of
the PWB’s. To gain access to the underside of the boards
follow the instructions on page 16. [Removal and Replacement
of the main bracket bottom plates].
the PWB’s. To gain access to the underside of the boards
follow the instructions on page 16. [Removal and Replacement
of the main bracket bottom plates].
Note: Before removing the rear cover completely,
disconnect the speaker connector which is located on
the inside of the set.
disconnect the speaker connector which is located on
the inside of the set.
Click on the first or last page to see other KV-28CS70B service manuals if exist.