Read Sony KV-27V42 Service Manual online
— 19 —
KV-27V42/27V66/29SL42K/29SL42T/29VL42T/29XL42T
5-1. Setting the Service Adjustment Mode
1. Standby mode (power off).
2.
Display
Channel 5
Sound volume
Power ON
+
on the Remote Commander (press each button within
a second).
a second).
Service Adjustment Mode On
1. The CRT displays the item being adjusted.
SERVICE HSIZ 0
Disp.
(Item)
Item
Data
2. Press
or
on the Remote Commander to select
an item.
3. Press
or
on the Remote Commander to change
the data.
4. Press
then
to save into the memory.
Service Adjustment Mode Memory
SERVICE WRITE
Green
Red
MUTING
ENTER
1. Press
then
on the Remote Commander to
initialize.
SERVICE RESET
2. Turn set off then on to exit service adjustment mode.
SECTION 5
CIRCUIT ADJUSTMENTS
Carry out step 1 when adjusting
IDs 0–4 and when replacing
and adjusting IC003.
IDs 0–4 and when replacing
and adjusting IC003.
Electrical Adjustment by Remote Commander
Use the Remote Commander (RM-Y165, RM-Y167 or RM-Y149A) to perform the circuit adjustments in this section.
NOTE: Test Equipment Required:
• Pattern generator
• Frequency counter
• Digital multimeter
• Audio oscillator
• Frequency counter
• Digital multimeter
• Audio oscillator
RM-Y165
5-2. Memory Write Confirmation Method
1. After adjustment, remove the power plug from the AC
outlet, then plug it in again.
2. Turn the power switch ON and set to service mode.
3. Call the adjusted items again to confirm they were adjusted.
5-3. Adjust Buttons and Indicators
Click on the first or last page to see other KV-27V42 service manuals if exist.