KV-27S42 - Sony TV Service Manual (repair manual). Page 8

Read Sony KV-27S42 Service Manual online

— 8 —
KV-27S42/27S46/27S66/29AL42/29AL42C/29AL66/
29AL66C/29SL42/29SL42C/29SL46/29XL42M
The following are partial abstracts from the Operating Instruction
Manual. The page numbers shown reflect those of the Operating
Instruction Manual.
SECTION 1
GENERAL
Connecting Your TV
This section covers basic connections in addition to any optional 
equipment you may be connecting.
Basic Connections
TV with indoor or outdoor antenna, or CATV cable
Depending on the cable available in your home, choose one of the 
connections below:
Cable and antenna
KV-27S66, 27V66 only
If your cable provider does not feature local channels, you may find this 
set up convenient.
If you are connecting to an indoor or outdoor antenna, it will be necessary to 
adjust the orientation of the antenna for best reception. 
Select CABLE or ANT mode by pressing 
 on the remote control.
CATV cable
(No connection “TO
CONVERTER” in this case)
Antenna cable
VHF/UHF
TO CONVERTER
AUX
(Rear of TV)
 User Guide
Connecting Additional Equipment
TV and VCR
1
Connect the coaxial cable from your TV antenna or cable TV to the IN 
jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your 
VCR to the VHF/UHF IN jack on the TV.
(Optional connection)
3
If your VCR is equipped with video inputs, for better picture quality 
you should connect A/V cables to AUDIO and VIDEO OUT on your 
VCR to AUDIO/VIDEO IN on your TV. You can use the 
 button 
to switch between the TV and VCR inputs.
!
VCR must be connected and turned on to operate PIP. (KV-27S46 only)
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as 
set on the rear of your VCR).
For optimum picture quality, use S VIDEO instead of the yellow A/V cable. 
S VIDEO does not provide sound, the audio cables must still be connected.
(Optional connection)
From
Cable/
VCR
TV
2
1
3
antenna
 Connecting Your TV
TV and Cable Box 
1
Connect the coaxial cable from the wall to the IN jack on your cable 
box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your 
cable box to the VHF/UHF IN jack on the TV.
To view channels from your cable box, tune your TV to channel 3 or 4 (as set 
on the rear panel of your cable box).
If you will be controlling all channel selection through your cable box, you 
should consider using the CHANNEL FIX feature on page 24.
 User Guide
TV, Cable box and Cable
KV-27S66, 27V66 only
For this set up, you can switch between scrambled channels (through 
your cable box), and normal (CATV) channels by pressing 
 on your 
remote control.
When using PIP, the AUX input cannot be viewed in the window picture.
 
(Rear panel KV-27V66 only)
5
6
3
4
Page of 58
Display

Click on the first or last page to see other KV-27S42 service manuals if exist.