Read Sony KV-27FA210 Service Manual online
Using the Remote Control
5
Programming the Remote Control
In order to use your remote control with other equipment, you need to program your remote
control. Use the following procedure to program the remote control.
control. Use the following procedure to program the remote control.
1
Check the list of “Manufacturer’s Codes” on page 6 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
2
Press .
3
Press
or
button to indicate the type of component you want to program with
the remote control.
4
Use the
buttons to enter the three-digit manufacturer’s code number.
5
Press .
6
To check if the code number works, aim the TV’s remote control at the component and
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with
that component. If it responds, you are done. If not try using another code listed for that
manufacturer.
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with
that component. If it responds, you are done. If not try using another code listed for that
manufacturer.
✍
The
and
button will flash when you press
.
✍
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
✍
If you have problems programming your remote control, see “Troubleshooting” on page 41.
0
9
01US04BAS-BR.fm Page 5 Tuesday, August 5, 2003 9:41 AM
Click on the first or last page to see other KV-27FA210 service manuals if exist.