KV-21M5D - Sony TV Service Manual (repair manual). Page 13

13

a

Turn up one side of the rubber cap in
the direction indicated by the arrow  a

1

2    Using a thumb pull up the rubber cap
      firmly in the direction indicated by the
      arrow  b

3    When one side of the rubber cap is
      separated from the anode button, the
      anode-cap can be removed by turning
      up the rubber cap and pulling it up in
      the direction of the arrow   c

b

b

c

Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.

1

To prevent damaging the surface of the anode-cap do not use sharp materials.

2

Do not apply too great a pressure on the rubber, as this may cause damage to the 
anode connector.

3

A metal fitting called a shatter hook terminal is fitted inside the rubber cap.
Do not turn the rubber foot over excessively this may cause damage if the shatter 
hook sticks out.

Cushion 

4   Deflection yoke

5  DGC holder

 Picture tube   9  

 C board   3  

Anode cap  1  

  2  A Board

    Spring tension   7  

  Degaussing coils  6  

  Four PT screws  8