Read Sony KV-21HFV100 (serv.man2) Service Manual online
– 8 –
KV-21HFV100
RM-W112
• REMOVAL OF ANODE-CAP
Note:
• After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
• REMOVING PROCEDURES
1
Turn up one side of the rubber cap in the direction
indicated by the arrow A.
indicated by the arrow A.
2
Using a thumb pull up the rubber cap firmly in the di-
rection indicated by the arrow B.
rection indicated by the arrow B.
3
When one side of the rubber cap is separated from
the anode button, the anode-cap can be removed by
the anode button, the anode-cap can be removed by
turning up the rubber cap and pulling it up in the
direction of the arrow C.
direction of the arrow C.
• HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-caps with
sharp shaped objects.
sharp shaped objects.
2
Do not press the rubber too hard so as not to
damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is
built into the rubber.
damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is
built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage
the rubber.
The shatter-hook terminal will stick out or damage
the rubber.
anode button
a
a
b
b
c
Click on the first or last page to see other KV-21HFV100 (serv.man2) service manuals if exist.