KV-21C5B - Sony TV Service Manual (repair manual). Page 14

14

a

Turn up one side of the rubber cap in
the direction indicated by the arrow  a

1

2    Using a thumb pull up the rubber cap
      firmly in the direction indicated by the
      arrow  b

3    When one side of the rubber cap is
      separated from the anode button, the
      anode-cap can be removed by turning
      up the rubber cap and pulling it up in
      the direction of the arrow   c

b

b

c

Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.

1

To prevent damaging the surface of the anode-cap do not use sharp materials.

2

Do not apply too great a pressure on the rubber, as this may cause damage to the 
anode connector.

3

A metal fitting called a shatter hook terminal is fitted inside the rubber cap.
Do not turn the rubber foot over excessively this may cause damage if the shatter 
hook sticks out.

Cushion 

  12  Four PT screws (M)

5  Anode cap

  10  Degaussing coils

 9  Two DGC holders

  13  Picture tube

  6  Chassis assy

11  Spring Extension

7   C Board

8   Deflection Yoke

1   Two Screws 

2   Speaker 

3   Two Screws

4   Speaker

    KV-21X5 only

    KV-21X5 only

     KV-21X5 only

KV-21X5 only