Read Sony KV-2199M5T Service Manual online
– 10 –
1
Turn up one side of the rubber cap in
the direction indicated by the arrow
the direction indicated by the arrow
a
.
2
Using a thumb, pull up the rubber
cap firmly in the direction indicated
cap firmly in the direction indicated
by the arrow
b
.
1
Don’t hurt the surface of anode-caps with
sharp shaped objects!
sharp shaped objects!
2
Don’t press the rubber too hard so as not to
damage the inside of anode-caps!
A material fitting called the shatter-hook
damage the inside of anode-caps!
A material fitting called the shatter-hook
terminal is built into the rubber.
3
Don’t turn the foot of rubber over too hard!
The shatter-hook terminal will stick out or
damage the rubber.
The shatter-hook terminal will stick out or
damage the rubber.
•
HOW TO HANDLE AN ANODE-CAP
3
When one side of the rubber cap is
separated from the anode button,
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
turning up the rubber cap and
pulling it up in the direction of the
arrow
c
.
•
REMOVAL OF ANODE-CAP
NOTE : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT, after removing the anode.
•
REMOVING PROCEDURES
2-5. DEMAGNETIZATION COIL AND PICTURE TUBE REMOVAL
a
b
b
c
a
Anode button
2
A board
3
C board
5
Deflection yoke
Cushion
6
Four screws
(Tapping screws)
1
Anode cap
9
Picture tube
4
VM board
8
Spring
7
Demagnetization
coil
Click on the first or last page to see other KV-2199M5T service manuals if exist.