Read Sony KP-FX43M31 / KP-FX43M61 / KP-FX43M91 / KP-FX53M31 / KP-FX53M61 / KP-FX53M91 Service Manual online
– 18 –
KP-FX43M31/M61/M91
KP-FX53M31/M61/M91
KP-FX53M31/M61/M91
RM-998
3-5. 2-POLE MAGNET ADJUSTMENT
1. Receive the Dot signal.
2. Place the caps on the red and blue lens so that only the green
2. Place the caps on the red and blue lens so that only the green
color is shown.
3. Turn the green focus VR on the focus pack to the left and set
to under focus to enlarge the spot.
4. Adjust the 2-Pole Magnet so that the bright spot should be
centerd.
(center of the dot doesn't move)
(center of the dot doesn't move)
5. Align the green focus VR and set for just (precise) focus.
Fig. 3-8
3-7.
4-POLE MAGNET ADJUSTMENT
1. Receive the Dot signal.
2. Place the caps on the red and blue lens so that only the green
2. Place the caps on the red and blue lens so that only the green
color is shown.
3. Turn the green focus VR on the focus pack to the right and
set to over focus to enlarge the spot.
4. Now align the 4-Pole Magnet so that the enlarged spot be-
comes a perfect circle.
5. Perform the same alignment for red.
Fig. 3-9
3-9. GREEN, RED AND BLUE FOCUS
ADJUSTMENT
3-9-1. Green, Red and Blue Lens Focus Adjustment
1. Receive the cross hatch signal.
2. Place the caps on the red and blue lens so that only the green
2. Place the caps on the red and blue lens so that only the green
color is shown.
3. Rotate the green lens and adjust to obtain the best lens focus
at the center area.
4. Fix lens screw.
5. Repeat above process for red and blue.
6. Rotate the blue lens and adjust to obtain the best lens focus at
5. Repeat above process for red and blue.
6. Rotate the blue lens and adjust to obtain the best lens focus at
the both side area.
7. Fix blue lens screw.
3-9-2. Green and Red Dot/Hatch Electrical Focus
Adjustment
1. Receive the signal.
2. Place the caps on the red and blue lens so that only the green
2. Place the caps on the red and blue lens so that only the green
color is shown.
3. Rotate the green focus VR on the focus pack and adjust to
obtain the best electrical focus in the adjust point.
4. Repeat above process for red and blue.
Adjust Point of Blue
Use the center dot
Use the center dot
OK
NG
NG
Adjust Point of Green and Red
Fig. 3-12
3-6. CENTERRING MAGNET ADJUSTMENT
1. Receive the SPCB signal.
2. Cover the both red and blue picture lenses with the lens caps
2. Cover the both red and blue picture lenses with the lens caps
to show only the color.
3. Adjust the green centering magnet to put the center of the
SPCB signal to the center of the screen.
4. Adjust red centering magnet in the same way.
5. Adjust blue centering magnet in the same way.
5. Adjust blue centering magnet in the same way.
3-8.
DEFOCUS ADJUSTMENT (BLUE)
1. Receive the Dot signal.
2. Cover the both red and green picture lenses with the lens
2. Cover the both red and green picture lenses with the lens
caps to show only the color.
3. Turn the blue focus VR on the focus pack to the right to
make the round dot elipical.
4. Set 4 pole magnet tab angle 12°.
5. Rotate 4 pole magnet keeping Tab angle 90° make the spot
5. Rotate 4 pole magnet keeping Tab angle 90° make the spot
shape vertical ellipse.
Fig. 3-10
OK
12
°
Fix
Rotate
Fig. 3-11
Click on the first or last page to see other KP-FX43M31 / KP-FX43M61 / KP-FX43M91 / KP-FX53M31 / KP-FX53M61 / KP-FX53M91 service manuals if exist.