Read Sony KP-FW51M90 Service Manual online
– 2 –
KP-FW51M90
RM-1015
CAUTION
SHORT CIRCUIT THE ANODE OF HTE PICTURE TUBE
AND THE ANODE CAP TO THE METAL CHASSIS, CRT
SHIELD, OR CARBON PAINTED ON THE CRT, AFTER
REMOVING THE ANODE.
AND THE ANODE CAP TO THE METAL CHASSIS, CRT
SHIELD, OR CARBON PAINTED ON THE CRT, AFTER
REMOVING THE ANODE.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
!
ON THE SCHEMATIC DIAGRAMS, EXPLODED
VIEWS AND IN THE PARTS LIST ARE CRITICAL TO
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY.
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY.
SPECIFICATIONS
Projection system
Picture tube
Projection lenses
Screen size
Television system
Color system
Stereo/Bilingual
system
system
Channel coverage
B/G
I
D/K
M
8
(Antenna)
Audio output (Speaker)
Number of terminal
(Video)
(Audio)
(S Video)
(Component
Video)
(G/B/R/HD/
VD Video)
(Center
Speaker)
i
(Headphones)
Power requirements
Power consumption (W)
Dimensions (w/h/d, mm)
Mass (kg)
KP-FW51M90
3 picture tubes, 3 lenses, horizontal inline system
7 inch high-brightnes monochorome tubes (6.3 raster size), with optical coupling
and liquid cooling system
and liquid cooling system
High performance, large-diameter highbrid lens F1.0
51 inches
B/G, I, D/K, M
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
NICAM Stereo/Bilingual D/K
VHF : E2 to E12 / UHF : E21 to E69 / CATV : S01 to S03, S1 to S41
VHF : 0 to 12, 5A, 19A/ UHF : 28 to 69 / CATV : S01 to S03, S1 to S41 (Australia
only)
VHF : 1 to 11 / UHF : 21 to 69 / CATV : S01 to S03, S1 to S41 (New Zealand only)
VHF : 0 to 12, 5A, 19A/ UHF : 28 to 69 / CATV : S01 to S03, S1 to S41 (Australia
only)
VHF : 1 to 11 / UHF : 21 to 69 / CATV : S01 to S03, S1 to S41 (New Zealand only)
UHF : B21 to B68 / CATV : S01 to S03, S1 to S41
VHF : C1 to C12, R1 to R12 / UHF : C13 to C57, R21 to R60 / CATV : S01 to S03,
S1 to S41, Z1 to Z39
S1 to S41, Z1 to Z39
VHF : A2 to A13 / UHF : A14 to A79/CATV : A-8 to A-2, A to W+4,
W+6 to W+84
W+6 to W+84
75-ohm external terminal
12W + 12W (7% distortion)
Input: 4 Output: 1
Phono jacks; 1 Vp-p, 75 ohms
Input: 6 Output: 1
Phono jacks; 500 mVrms
Input: 2
Y: 1 Vp-p, 75 ohms,
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
Input: 2
Phono jacks
Y: 1 Vp-p, 75 ohms, sync negative
P
Y: 1 Vp-p, 75 ohms, sync negative
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
Input: 1
Phono jacks
G: 0.7 Vp-p, 75 ohms
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
HD: 0.7 Vp-p, 75 ohms
VD: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p, 75 ohms
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
HD: 0.7 Vp-p, 75 ohms
VD: 0.7 Vp-p, 75 ohms
Input:1
120 W max., 8 ohms
Output: 1
Stereo minijack
220 V AC, 50/60Hz
250 W
1194
×
1350
×
650
78
Design and specifications are subject to change without notice.
Click on the first or last page to see other KP-FW51M90 service manuals if exist.