KP-EF41HK2, KP-EF41ME2, KP-EF41MN2, KP-EF41SN2, KP-EF48HK2, KP-EF48ME2, KP-EF48MN2, KP-EF48SN2, KP-EF53HK2, KP-EF53ME2, KP-EF53MN2, KP-EF53SN2 - Sony TV Service Manual (repair manual). Page 17

Read Sony KP-EF41HK2 / KP-EF41ME2 / KP-EF41MN2 / KP-EF41SN2 / KP-EF48HK2 / KP-EF48ME2 / KP-EF48MN2 / KP-EF48SN2 / KP-EF53HK2 / KP-EF53ME2 / KP-EF53MN2 / KP-EF53SN2 Service Manual online

– 17 –
Operations
32
-EN
Customizing the TV
Using the AV OUT (advanced rec-out)
terminal
You can select the output signal from the Ú (monitor/
TV output) jacks at the rear of the TV. However, the
signals of the PROGRAM INDEX, STROBE, PIP modes,
the signals from the 
 (component video input)
jacks, and the Teletext broadcast cannot be output even
though MONITOR is selected.
1
Press MENU.
2
Press V or v to move the cursor (z) to the
FEATURES menu (
), and press ENTER.
3
Press V or v to move the cursor (z) to AV
OUT, and press ENTER.
4
Press V/b/v/B to select the output signal,
and press ENTER.
Select
To
TV
Output the signal of the TV broadcast.
MONITOR
Output the signal of the picture you are
watching as a main picture.
Notes
• Do not change the channel while recording with a VCR
through the Ú (monitor/TV output) jacks. If you change the
channel, it also changes the channel you are recording.
• When the signals from the 
 (component video input) jacks
are displayed on the main screen, the signals can't be output
even though MONITOR is selected.
A / V   CONT ROL
DY NAM I C
SOF T
S T A NDARD
P ERSONAL
V I DEO   AD J UST
A UD I O   AD J UST
MENU
GAME  MODE
HYPER  S URROUND :
OF F
MON I TOR
AV   OUT :
F E AT URES
ENTER
ENTER
CONVERGENCE
33
-EN
Additional Information
If you have any problems, read this manual again and
check the countermeasure for each of the symptoms
listed below.
If the problem persists, contact your nearest Sony
dealer or authorized service center.
Snowy picture
Noisy sound
/ Check the antenna.
/ Check the antenna connection on the TV
and on the wall.
/ Check the TV system (TV SYS) setting.
/ Check the ATT (attenuator) setting.
Dotted lines or stripes
/ This may be caused by local interference
(e.g. cars, neon signs, hair dryers, etc.).
Adjust the antenna for minimum
interference.
Double images or “ghosts”
/ This may be caused by reflections from
nearby mountains or buildings. A highly
directional antenna may improve the
picture.
Troubleshooting
Good picture
Noisy sound
/ Check the TV system (TV SYS) setting.
No picture
No sound
/ Press u.
/ Press U to turn off the TV for about five
seconds and then turn it on again.
/ Check the power cord connection.
/ Check the antenna connection.
/ Check the VCR connections.
Good picture
No sound
/ Press Á +.
/ If “CENTER IN” is displayed on the
screen, select “SPEAKER: MAIN” of the
AUDIO ADJUST menu.
/ Press ¤.
/ Press A/B
.
No color
/ Adjust the COLOR level in the VIDEO
ADJUST menu of the PERSONAL option.
/ Check the color system (COL SYS) setting.
TV cannot receive stereo broadcast signal
/ Press A/B
 until “AUTO” appears on
the screen.
TV cabinet creaks
/ Even if the picture or the sound is normal,
changes in the room temperature
sometimes make the TV cabinet expand or
contract, making a noise. This does not
indicate a malfunction.
Additional Information
Additional Information
Page of 102
Display

Click on the first or last page to see other KP-EF41HK2 / KP-EF41ME2 / KP-EF41MN2 / KP-EF41SN2 / KP-EF48HK2 / KP-EF48ME2 / KP-EF48MN2 / KP-EF48SN2 / KP-EF53HK2 / KP-EF53ME2 / KP-EF53MN2 / KP-EF53SN2 service manuals if exist.