Read Sony KP-57WV600 / KP-57WV700 / KP-65WV600 / KP-65WV700 Service Manual online
— 10 —
KP-57WV600/57WV700/
65WV600/65WV700
1-1. REAR BOARD REMOVAL
1-2. CHASSIS ASSEMBLY REMOVAL
SECTION 1: DISASSEMBLY
1-3. SERVICE POSITION
Fifteen Screws
Dome Washer
(Hex Tap 4 x 20)
(Hex Tap 4 x 20)
Rear board
2
1
Four screws
Chassis assy
2
1
Dome Washer
(Hex Tap 4 x 20)
(Hex Tap 4 x 20)
Covers
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
Screws
(+BVTP3x12)
(+BVTP3x12)
Chassis assembly
Free wiring from purse locks.
NOTE: Observe wire dress
and return to original condition.
NOTE: Observe wire dress
and return to original condition.
1
2
3 When plugging in connector from
HM Board to B Board at CN3603
insure two brown wires are facing
upward towards the HV block
assembly.
insure two brown wires are facing
upward towards the HV block
assembly.
Click on the first or last page to see other KP-57WV600 / KP-57WV700 / KP-65WV600 / KP-65WV700 service manuals if exist.