KP-51PX3 - Sony TV Service Manual (repair manual). Page 8

Read Sony KP-51PX3 Service Manual online

 8 
KP-51PX3
RM-943
12
Introducing and Using the Menu System
Your Projection TV uses an On-Screen menu system to guide you through the operations. Use the following 
buttons on the Remote Control to operate the menu system: 
1
To switch on the menu screens:
Press the MENU button to switch the first level menu on.
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset
Noise Reduction:
Auto
Colour Tone:
Cold
Picture Adjustment
Select:
Enter: OK
Exit: MENU
Picture Mode:
Live
Contrast:
Reset
Noise Reduction:
Auto
Colour Tone:
Cold
TV Functions
2
To navigate through the menus:
• To highlight and select the desired menu or option, press
 v
 or 
V
.
• To enter the selected menu or option, press OK or 
b
.
• To return to the last menu or option, press OK or 
B
.
• To alter the settings of your selected option, press 
v
/
V
/
or 
b
.
• To confirm and store your selection, press OK
3
To switch off the menu screens:
Press the MENU button to remove the menu from the  screen.
11
GB
Adjusting Colour Registration (Convergence)
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the
outlines of the images. 
In that case, proceed as follows:
Auto converge the Red, Green, and Blue 
Lines
1
Press on the mark 
 on the right side of the projection TV to 
reveal control panel.
2
 Press 
 button.
The Auto Convergence function works for about 10 seconds. 
When the white cross disappears from the screen, your 
projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
•  you watch the teletext broadcast.
• you watch NexTView.
First Time Operation
Page of 104
Display

Click on the first or last page to see other KP-51PX3 service manuals if exist.