KP-48V85, KP-53V85, KP-61V85 - Sony TV Service Manual (repair manual). Page 10

– 10 –

You may find it necessary to use some of the
following connector types during set up.

Standard TV cable and antenna cable

High quality video cable for enhanced
picture quality

Video - Yellow
Audio (Left) - White
Audio (Right) - Red

Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.

Y - Green
P

B

 (C

B

, C

b

 or B–Y) - Blue

P

R

 (C

R

, C

r

 or R–Y) - Red

Screw into connection.

Push into connection.

Align guides and
push into connection.

Push into connection.

Sony cable for S-Link and CONTROL S
connections. These features are exclusive to
Sony products and allow greater control of
all Sony equipment.

Note:
• For S-Link and CONTROL S connections,

you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can purchase
a separate S-Link/CONTROL S cable (RK-
G69HG).

To control other Sony equipment with the
projection TV's remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.

The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see 

); older homes will probably have 300 -

ohm twin lead cable (see 

); still other homes

may contain both (see 

).

Use 75-ohm coaxial cable for improved
picture quality (see 

).

Push into connection.

Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)

For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes:
• You may be able to program your Sony

remote control to operate your cable box.
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 57)

• During PIP, P&P, CHANNEL INDEX or

Favorite Channel viewing, the AUX input
can only be viewed in the main picture.

Select Cable or ANT mode by pressing ANT
on the remote control.

Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set “Cable” to “On” in the Channel Set
Up menu (page 39).

This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.

You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.