Read Sony KP-48V80 / KP-53V80 / KP-61V80 Service Manual online
– 13 –
KP-48V80/53V80/61V80
RM-Y905
RM-Y905
RM-Y905
1 0
Installing and Connecting the Projection TV (continued)
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
1
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
(MONO) input on the projection TV.
Disconnect all power sources before making any connections.
(Front of projection TV)
Camcorder
Audio/
video
outputs
video
outputs
VIDEO
VMC-810S/820S
(not supplied)
(not supplied)
AUDIO-L
AUDIO-R
AUDIO-R
S VIDEO
VIDEO
L
(MONO)
R
AUDIO
VIDEO 2 INPUT
YC-15V/30V (not supplied)
S VIDEO
S VIDEO
O U T
O U T
1 1
Disconnect all power sources before making any connections.
(Rear of projectionTV)
Indicates direction
of signal
Connecting two VCRs for tape
editing
editing
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
using the connection instructions on page
6 of this manual.
2
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VIDEO
AUDIO-L
AUDIO-R
AUDIO-L
AUDIO-R
(Rear of projection TV)
VCR (for recording)
1
2
VMC-810S/820S
(not
(not
supplied)
VCR (for playback)
VMC-810S/820S
(not
(not
supplied)
LINE
OUT
IN
MONITOR
OUT
OUT
VIDEO IN
VCR
AUDIO-L
VIDEO
AUDIO-R
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
VHF/UHF
AUX
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
AUDIO R AUDIO L VIDEO
LINE
OUT
OUT
IN
AUDIO R AUDIO L VIDEO
LINE
IN
OUT
IN
Click on the first or last page to see other KP-48V80 / KP-53V80 / KP-61V80 service manuals if exist.