KP-48S65R - Sony TV Service Manual (repair manual). Page 6

– 6 –

6

-EN

Although you can use either an indoor or outdoor
antenna with your projection TV, we recommend that
you connect an outdoor antenna or a cable TV system
to get better picture quality.

Connect your antenna cable to the VHF/UHF antenna
terminal. If you cannot connect your antenna cable
directly to the terminal, follow one of the instructions
below depending on your cable type.

Pay cable TV systems use scrambled or encoded signals
requiring a cable box* in addition to the normal cable
connection.

* The cable box will be supplied by the cable company.

• You cannot watch the signal through an AUX connector as a

window picture.

• Do not connect anything to the TO CONVERTER connector in

this case.

• Most VHF/UHF combination antennas have a signal splitter.

Remove the splitter before attaching the appropriate connector.

• If you use the U/V mixer, snow and noise may appear in the

picture when viewing cable TV channels over 37.

If your cable company requires you to connect a cable
box, make the connection as follows:

7

-EN

After making these connections, you will be able to do
the following:
• View the playback of video tapes
• Record one TV program while viewing another

program

• Watch two TV programs at once using PIP

For details on connection, see your VCR instruction
manual.
Before making the connection, disconnect the AC power
cords of the equipment to be connected.

• To connect a monaural VCR, connect the audio output of the VCR

to AUDIO-L (MONO) of VIDEO 1/2/3 IN on the projection TV.

AUDIO VIDEO

LINE

OUT

OUT

IN

OUT

IN

OUT

AUDIO VIDEO

LINE

OUT

IN