KP-44PX2, KP-44PX2U - Sony TV Service Manual (repair manual). Page 14

TV system: 
Depending on your country selection:
B/G/H, D/K, L, I

Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)

Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, 

R21-R69

L:

F-2F-10, B-Q, F21-F69

I:

UHF B21-B69

Projected picture size:
44” (approx. 112 cm. measured diagonally)

/

21-pin scart connector (CENELEC standard)  

including audio/video input, RGB input, TV 

audio/video output.

/

  21-pin Scart connector (CENELEC standard)  

including audio / video input, RGB input, 

monitor audio/video output.

 

/

  21-pin Scart connector (CENELEC standard) 

including audio / video input, S video input,

 

selectable audio / video output and Smartlink 

interface.

     

audio outputs (Left/Right) - phono jacks 

S Video input – 4 pin DIN

   video input – phono jack

   audio input – phono jacks

       

headphones jack 

2 x 30 W (music power)
2 x 15 W (RMS)

Power Consumption:
225 W

Standby Power Consumption:
< 0.7 W 

Dimensions (w x h x d) :
approx. 1100 x 1160 x 536 mm.

Weight:
approx. 61 Kg.

Accessories supplied:
1 Remote Control (RM-938)
2 Batteries (IEC designated, AA size) 

Other features:
•Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page 

TEXT  memory).

• NICAM.
• Sleep Timer.
• SmartLink (direct link between your  

projection TV set and a compatible VCR. 
For more information on SmartLink, 
please refer to the Instruction Manual of 
your VCR).

• TV system autodetection.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.
• ACI (Auto Channel Installation).

S

S

  (SMARTLINK)

 

 

Here are some simple solutions to problems which may affect the picture and sound.

If you continue to experience problems, have your projection TV serviced by qualified personnel.

 

Never open the casing yourself.

No picture (screen is dark) and no sound.

Poor or no picture (screen is dark), but good 
sound.

No picture or no menu information from 
equipment connected to the Scart connector.

Good picture, no sound.

No colour on colour programmes.

When you switch on the TV the last channel 
you were watching before switching the TV 
off does not appear.

Undefined picture with different colour on 
the outlines of the images.

Noisy picture when viewing a TV channel.

No unscrambling or unstable picture whilst 
viewing a scrambled channel with a decoder 
connected through the Scart connector  

/

.

Distorted picture when changing 
programmes or selecting teletext.

Wrong characters appear when viewing 
teletext.

Wrong characters appear when viewing 
NexTView.

Brightness level of the picture is notoriously 
decreased when viewing a teletext page.

Remote control does not function.

The standby indicator 

 on the projection  

TV flashes.  

S

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of the projection TV. 

• If the standby indicator 

 is on, press TV 

 button on the remote control. 

• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to 

return to the factory settings.

• Check that the optional equipment is on and press the 

 button repeatedly on the 

remote control until the correct input symbol is displayed on the screen. 

• Press the  

 + button on the remote control. 

• Check that “TV Speakers” is “On” in the “Sound Adjustment” menu.
• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to 

return to factory settings.

• This is not a malfunction. Press the number buttons on the remote control to select the 

desired channel.

• Adjust the colour registration. For more details, please refer to “Adjusting Colour 

Registration (Convergence)” section on page 10.

• Using the menu system, select the “Manual Programme Preset” menu and adjust Fine 

Tuning (AFT) to obtain better picture reception.

• Using the menu system, select the “Noise Reduction” option in the “Picture 

Adjustment” menu and select “Auto” to reduce the noise in the picture.

• Using the menu system, select the “Features” menu. Then enter to “Detail Set Up” 

option and set “AV3 Output” to “TV”.

• Check that the Decoder is not connected on the scart 

/

.

• Turn off any equipment connected to the Scart connector on the rear of the projection 

TV.

• Using the menu system, enter to the “Language/Country” menu and select the 

country in which you operate the projection TV set. For Cyrillic languages, we 
recommend to select Russia country in the case that your own country does not 
appear in the list.  

• Use the menu system to enter the “Language/Country” menu (see page 14) and select 

the same language that NexTView is broadcast in.

• This is not a malfunction. After 5 minutes viewing the same teletext page and without 

any button being pressed, the projection TV automatically decreases the brightness 
level to avoid any damage to the picture tube. To reset the brightness level, press any 
button of the remote control.

• Check that the Media Selector on the remote control is set  to the device you are using 

(VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD even when the Media Selector 

has been set correctly. Enter the necessary code set as explained in the “Remote 
Control Configuration for VCR/DVD” chapter on page 23.

• Replace the batteries.

• Contact your nearest Sony service centre.