KP-44PS2, KP-44PS2U, KP-51PS2 - Sony TV Service Manual (repair manual). Page 18

–

 18 

–

With this menu screen, you can set timers or record selected
programmes.

Push 

4 or $ to select a future programme in the programme list

column.

Press the OK button to display the Long Info menu on the TV
screen. 

Push the joystick 

4 or $ to highlight the   icon then press the OK 

button repeatedly to "set the timer" or "cancel the timer". If you choose
to set the timer, the programme is marked with a clock symbol and a
message appears on the screen shortly before the programme is due
to start asking whether you wish to still view this programme.

Push the joystick 

Z or z to highlight the 

 icon then press the OK 

button repeatedly to switch on/off the timer table. This table shows the 
programmes on which you have already set a timer. (You can set a timer 
on up to 5 programmes).

(only with Smartlink VCRs)

Connect your Smartlink VCR.

Push the joystick 

Z or z to select 

 then press the OK button

to download the information to your VCR.

  To set up the VCR:

VPS/PDC
Push the joystick 

Z or z to select VPS/PDC then press the OK

button repeatedly to select On or Off. With this setting on you have
the guaranteed recording of the whole broadcast should there be a
change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.

Speed
Push the joystick 

$ to select Speed then press the OK button

repeatedly to select between SP for standardplay or LP for longplay.
With longplay you can record twice as much on a videotape.
The picture quality however may suffer.

VCR Setup
Push the joystick 

$ to select VCR Setup then press the OK

button repeatedly to select which VCR you wish to programme,
namely VCR1 or VCR2.

Finally, push the joystick 

z to select the 

 icon then press the

 button to remove the menu from the TV screen.

NexTView

07 Tue

12:38

Address Mapping

The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.

If other values are set, the complete
combination will be scrolled.

Example:
if the DPWC is set to '63', the char-

Speed
Timer Prog

VPS/PDC

SP

VCR1

On

This channel has been set for a timer

First nextTView/EPG-Providers in Europe

SWISS

TXT

TPS / RINGIER

nexTView

Tue 07. 04 .98

S

RM 903

PROGR

MENU

TV

VIDEO

Optional Connections

A Audio/video and RGB signal
B Audio/video and S video signal
C Audio/video and S video signal
D Centre speaker input Set “Speaker”

on the Features menu to “Centre in”.

E No inputs
F S Video signal
G Video signal
H Audio signal
I No input

B

A

C

H

I

DVD

VCR

S.VHS/Hi8/DVC 
camcorder

Dolby

Surround 

Amplifier

Hi-Fi

F

G

8mm/Hi8/

DVC

camcorder

Decoder

D

E

Video/audio from TV tuner.
Video/audio from selected source.
Video/audio displayed on TV screen (monitor out).
No outputs.

Audio signal.
No output.
No output.
No output.
Audio signal to headphones.

To avoid picture 
distortion:
• Do not connect 

equipment to

F and G
connectors at
the same time.

VCR

 

 

Using the following instructions, you can connect a wide range of optional equipment to this set.