KP-43T70K, KP-43T70T, KP-48VS70K, KP-53VS70K, KP-53VS70T - Sony TV Service Manual (repair manual). Page 18

Read Sony KP-43T70K / KP-43T70T / KP-48VS70K / KP-53VS70K / KP-53VS70T Service Manual online

– 17 –
2 1
Treble
Sound adjustment
Bass
Sound adjustment
Balance
Sound adjustment
MTS/SAP
Enjoy stereo,
bilingual and mono
programs.
Auto Volume
Adjust the sound
level.
Effect
Customizes
surround sound
effects based on the
program’s audio
type.
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
When the sound is intermittent due to poor reception conditions, select “Stereo”
or “SAP.”
Stereo:  Select for stereo reception when viewing a program broadcast in stereo.
SAP:  Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)
Auto SAP:  Select to listen to SAP when a SAP program is broadcast and return
to stereo reception automatically for non-SAP programs.
Quick MTS access:  Press 
MTS/SAP
 on the remote control to cycle through the
“MTS/SAP” options as follows: Stereo 
n
 SAP 
n
 Mono 
n
 Auto SAP.
On: Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Off: Sound output coming from the TV speakers varies according to the received
channel.
“Effect” can only be set when “Speaker” is set to “On” or “Off.”
Simulated: Adds a surround-like effect to mono programs.
Surround: Simulates sound with the atmosphere of a movie theater or a concert
hall for stereo programs.
BBE*: Centers the sound intensity to the front, creating an effect as if you were
seated in front of an orchestra.
Off: Normal stereo or mono reception.
Quick Effect access:
  
Press 
 on the remote control to cycle through the
“Effect” options as follows: Simulated 
n
 Surround 
n
 BBE 
n
 Effect Off.
(continued)
 Using the Audio Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 19.
To select the Audio 
 menu:
Display 
 
/
 
 Highlight  
 
 
/
 
  Select
To restore the factory settings
Press RESET on the remote control while the
Audio menu is selected.
* The BBE is manufactured by Sony Corporation
under license from BBE Sound, Inc. It is covered
by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the
trademarks of BBE Sound, Inc.
}
Sliders
A u d i o
T r e b l e
B a s s
B a l a n c e
M T S / S A P :
A u t o   V o l u m e :
E f f e c t :
S p e a k e r :
A u d i o   O u t :
S A V A   S P   C o n t r o l
Move
Select
Exit
MENU
S t e r e o
O n
O n
V a r i a b l e
S u r r o u n d
ch
MENU
2 2
Adjusting Your SET UP (menus) (continued)
Speaker
Custom selection
of audio output
source
Audio Out
Easy control of
volume adjustment
SAVA SP Control
Controls Sony
SAVA speaker’s
mode.
On: Select to listen to the sound from the projection TV speakers alone.
Off: Select to turn off the projection TV speakers and listen to the
projection TV’s sound only through an external audio system’s speakers.
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
TV’s sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the
projection TV’s remote control. (see “SAVA SP Control” below)
“Audio Out” can only be set when “Speaker” is set to “Off.”
Fixed:  Sound output is held at a fixed level through the audio system.
Use the AV receiver’s remote control to adjust the volume.
Variable:  Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
“SAVA SP Control” can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to
“SAVA SP.” (see “Speaker” above)
You can also adjust the SAVA speaker’s volume using VOL +/– of the projection
TV’s remote control.
Surround Mode:  Select to activate the SAVA Speaker’s surround mode.
Super Woofer Mode:  Select to activate the SAVA Speaker’s super woofer mode.
Page of 92
Display

Click on the first or last page to see other KP-43T70K / KP-43T70T / KP-48VS70K / KP-53VS70K / KP-53VS70T service manuals if exist.