Read Sony KP-43T70K / KP-43T70T / KP-48VS70K / KP-53VS70K / KP-53VS70T Service Manual online
– 10 –
7
Disconnect all power sources before making any connections.
Note:
• To view scrambled channels through the
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
input on the projection TV.
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
from your camcorder.
1
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
camcorder to AUDIO and S VIDEO IN
inside the drop-down panel on the front
of the projection TV (White-AUDIO Left,
Red-AUDIO Right**).
connect AUDIO and S VIDEO OUT on the
camcorder to AUDIO and S VIDEO IN
inside the drop-down panel on the front
of the projection TV (White-AUDIO Left,
Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
(MONO) input on the projection TV.
S VIDEO
VIDEO
L
(MONO)
R
AUDIO
VIDEO 2 INPUT
(Front of projection TV)
Camcorder
VMC-810S/820S
(not supplied)
(not supplied)
YC-15V/30V (not supplied)
VIDEO
AUDIO-L
AUDIO-R
AUDIO-R
S VIDEO
Audio/
video
outputs
video
outputs
S VIDEO
OUT
OUT
8
Installing and Connecting the Projection TV (continued)
S VIDEO
VIDEO
AUDIO
L
R
VIDEO
VHF/UHF
AUX
(MONO)
IN
VIDEO 1
VIDEO 3
OUT
MONITOR AUDIO
(VAR/FIX)
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
COMPONENT
AUDIO R AUDIO L VIDEO
LINE
OUT
OUT
IN
AUDIO R AUDIO L VIDEO
LINE
IN
OUT
IN
Disconnect all power sources before making any connections.
(Rear of projectionTV)
Indicates direction
of signal
of signal
Connecting two VCRs for tape
editing
editing
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
using the connection instructions on page
6 of this manual.
2
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VIDEO
AUDIO-L
AUDIO-R
AUDIO-L
AUDIO-R
(Rear of projection TV)
VCR (for recording)
1
2
VMC-810S/820S
(not supplied)
(not supplied)
VCR (for playback)
VMC-810S/820S
(not supplied)
(not supplied)
LINE
OUT
IN
MONITOR
OUT
OUT
VIDEO IN
VCR
AUDIO-L
VIDEO
AUDIO-R
Click on the first or last page to see other KP-43T70K / KP-43T70T / KP-48VS70K / KP-53VS70K / KP-53VS70T service manuals if exist.