KP-43T70, KP-46C70, KP-48S70, KP-53N74, KP-53S70, KP-61S70 - Sony TV Service Manual (repair manual). Page 9

– 9 –

The operating instructions mentioned here are partial abstracts from the
Operating Instructions Manual. The page numbers of the Operating
Instruction Manual remain as in the manual. (Part no : 3-866-565-11)

Names of the buttons on the remote control are
presented in different colors to represent the
available functions.

Transparent .... Press to select the component

you want to control; e.g. VTR
(VCR)/MDP/DVD Player,
SAT (satellite receiver)/
CABLE, or projection TV.

Green ............... Buttons relevant to power

operations, like turning the
projection TV, SAT/CABLE, or
VTR (VCR)/MDP/DVD Player
on or off

White ............... TV/VTR (VCR)/MDP/DVD

Player/SAT (satellite
receiver)/CABLE operation
buttons

Yellow .............. PIP operation buttons
Blue .................. SAT operation buttons
Green ............... S-Link operation buttons
Pink .................. DVD Player operation buttons

m

N

M

x

z

X

V

v

B

b

• Operate the projection TV only on 120 V

AC.

• The plug is designed, for safety purposes,

to fit into the wall outlet only one way. If
you are unable to insert the plug fully
into the outlet, contact your dealer.

• If any liquid or solid object should fall

inside the cabinet, unplug the projection
TV immediately and have it checked by
qualified service personnel before
operating it further.

• If you will not be using the projection TV

for several days, disconnect the power by
pulling the plug itself. Never pull on the
cord.

Clean the cabinet of the projection TV with a
dry soft cloth.  To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with solution of mild
soap and warm water.  Never use strong
solvents such as thinner or benzine for
cleaning.

If the picture becomes dark after using the
projection TV for a long period of time, it
may be necessary to clean the inside of the
projection TV. Consult qualified service
personnel.

• To prevent internal heat buildup, do not

block the ventilation openings.

• Do not install the projection TV in a hot

or humid place, or in a place subject to
excessive dust or mechanical vibration.

• Avoid operating the projection TV at

temperatures below 5° C (41° F).

• If the projection TV is transported

directly from a cold to a warm location,
or if the room temperature changes
suddenly, the picture may be blurred or
show poor color. In this case, please wait
a few hours to let the moisture evaporate
before turning on the projection TV.

• To obtain the best picture, do not expose

the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling
or to cover the windows that face the
screen with opaque drapery. It is
desirable to install the projection TV in a
room where the floor and walls are not of
a reflective material.