Read Sony KP-41PX2 Service Manual online
–
14
–
KP-41PX2
RM-938
25
GB
Specifications
Additional Information
TV system:
Depending on your country selection:
B/G/H, D/K, L, I
Depending on your country selection:
B/G/H, D/K, L, I
Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF:
VHF:
E2-E12
UHF:
E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K:
HYPER: S21-S41
D/K:
R1-R12, R21-R69
L:
F-2F-10, B-Q, F21-F69
I:
UHF B21-B69
Projected picture size:
41” (approx. 103 cm. measured diagonally)
41” (approx. 103 cm. measured diagonally)
Rear Terminals
1
/
1
21-pin scart connector (CENELEC standard)
including audio/video input, RGB input, TV
audio/video output.
audio/video output.
2
/
2
21-pin Scart connector (CENELEC standard)
including audio / video input, RGB input,
monitor audio/video output.
monitor audio/video output.
3
/
3
21-pin Scart connector (CENELEC standard)
including audio / video input, S video input,
selectable audio / video output and Smartlink
interface.
interface.
audio outputs (Left/Right) - phono jacks
Front Terminals
4
S Video input – 4 pin DIN
4
video input – phono jack
4
audio input – phono jacks
headphones jack
Sound Output:
2 x 30 W (music power)
2 x 15 W (RMS)
2 x 15 W (RMS)
Power Consumption:
225 W
225 W
Standby Power Consumption:
< 0.7 W
< 0.7 W
Dimensions (w x h x d) :
approx. 948 x 992 x 511 mm.
approx. 948 x 992 x 511 mm.
Weight:
approx. 44 Kg.
approx. 44 Kg.
Accessories supplied:
1 Remote Control (RM-938)
2 Batteries (IEC designated, AA size)
1 Remote Control (RM-938)
2 Batteries (IEC designated, AA size)
Other features:
•Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page
•Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page
TEXT memory).
• NICAM.
• Sleep Timer.
• SmartLink (direct link between your
• Sleep Timer.
• SmartLink (direct link between your
projection TV set and a compatible VCR.
For more information on SmartLink,
please refer to the Instruction Manual of
your VCR).
For more information on SmartLink,
please refer to the Instruction Manual of
your VCR).
• TV system autodetection.
• Dolby Virtual.
• BBE.
• PIP.
• ACI (Auto Channel Installation).
• Dolby Virtual.
• BBE.
• PIP.
• ACI (Auto Channel Installation).
S
S
(SMARTLINK)
Design and specifications are subject to change without notice.
Ecological Paper - Totally Chlorine Free
26
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Additional Information
If you continue to experience problems, have your projection TV serviced by qualified personnel.
Never open the casing yourself.
Problem
No picture (screen is dark) and no sound.
Poor or no picture (screen is dark), but good
sound.
sound.
No picture or no menu information from
equipment connected to the Scart connector.
equipment connected to the Scart connector.
Good picture, no sound.
No colour on colour programmes.
When you switch on the TV the last channel
you were watching before switching the TV
off does not appear.
you were watching before switching the TV
off does not appear.
Undefined picture with different colour on
the outlines of the images.
the outlines of the images.
Noisy picture when viewing a TV channel.
No unscrambled picture whilst viewing an
unscrambled channel with a decoder
connected through the Scart connector
unscrambled channel with a decoder
connected through the Scart connector
3
/
3
.
Distorted picture when changing
programmes or selecting teletext.
programmes or selecting teletext.
Wrong characters appear when viewing
teletext.
teletext.
Wrong characters appear when viewing
NexTView.
NexTView.
Brightness level of the picture is notoriously
decreased when viewing a teletext page.
decreased when viewing a teletext page.
Remote control does not function.
The standby indicator
on the projection
TV flashes.
S
Solution
• Check the aerial connection.
• Plug the TV in and press the
• Plug the TV in and press the
button on the front of the projection TV.
• If the standby indicator
is on, press TV
button on the remote control.
• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to
return to the factory settings (see page 12).
• Check that the optional equipment is on and press the
button repeatedly on the
remote control until the correct input symbol is displayed on the screen (see page 21).
• Press the
+ button on the remote control.
• Check that “TV Speakers” is “On” in the “Sound Adjustment” menu (see page 12).
• Check that headphones are not connected.
• Check that headphones are not connected.
• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to
return to factory settings (see page 12).
• This is not a malfunction. Press the number buttons on the remote control to select the
desired channel.
• Adjust the colour registration. For more details, please refer to “Adjusting Colour
Registration (Convergence)” section on page 10.
• Using the menu system, select the “Manual Programme Preset” menu and adjust Fine
Tuning (AFT) to obtain better picture reception (see page 16).
• Using the menu system, select the “Noise Reduction” option in the “Picture
Adjustment” menu and select “Auto” to reduce the noise in the picture (see page 12).
• Using the menu system, select the “Features” menu. Then enter to “AV3 Output” and
set to “TV” (see page 13).
• Check that the Decoder is not connected on the scart
2
/
2
.
• Turn off any equipment connected to the Scart connector on the rear of the projection
TV.
• Using the menu system, enter to the “Language/Country” menu and select the
country in which you operate the projection TV set. For Cyrillic languages, we
recommend selecting Russia country if your own country does not appear in the list
(see page 14).
recommend selecting Russia country if your own country does not appear in the list
(see page 14).
• Use the menu system to enter the “Language/Country” menu (see page 14) and select
the same language that NexTView is broadcast in.
• This is not a malfunction. After 5 minutes viewing the same teletext page and without
any button being pressed, the projection TV automatically decreases the brightness
level to avoid any damage to the picture tube. To reset the brightness level, press any
button of the remote control.
level to avoid any damage to the picture tube. To reset the brightness level, press any
button of the remote control.
• Check that the Media Selector on the remote control is set to the device you are using
(VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD even when the Media Selector
has been set correctly. Enter the necessary code set as explained in the “Remote
Control Configuration for VCR/DVD” chapter on page 23.
Control Configuration for VCR/DVD” chapter on page 23.
• Replace the batteries.
• Contact your nearest Sony service centre.
Click on the first or last page to see other KP-41PX2 service manuals if exist.