Read Sony KP-41PX1 / KP-41PX1K / KP-41PX1R Service Manual online
SERVICE MANUAL
MODEL
COMMANDER DEST.
CHASSIS NO.
CHASSIS
RE-2A
PROJECTION TV
KP-41PX1
RM-892
AEP
SCC-P66A-A
KP-41PX1K
RM-892
OIRT
SCC-P68A-A
KP-41PX1R
RM-862
Russian SCC-P67A-A
RM-892
2
0
5
8
1
4
7
3
6
9
OK
– 2 –
KP-41PX1/41PX1K/41PX1R
K
RM-892
RM-892
RM-862
CAUTION
SHORT CIRCUIT THE ANODE OF HTE PICTURE TUBE
AND THE ANODE CAP TO THE METAL CHASSIS, CRT
SHIELD, OR CARBON PAINTED ON THE CRT, AFTER
REMOVING THE ANODE.
AND THE ANODE CAP TO THE METAL CHASSIS, CRT
SHIELD, OR CARBON PAINTED ON THE CRT, AFTER
REMOVING THE ANODE.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
0
ON THE SCHEMATIC DIAGRAMS, EXPLODED
VIEWS AND IN THE PARTS LIST ARE CRITICAL TO
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY.
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY.
SPECIFICATIONS
TV system
B/G/H, D/K, I, L
B/G/H, D/K, I, L
Colour system
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel coverage
VHF:
VHF:
E2-E12
UHF:
E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K:
HYPER: S21-S41
D/K:
R1-R12, R21-R69
L:
F2-F10, B-Q, F21-F69
I:
UHF B21-B69
Projected picture size
41 inches
Approx. 130 measured diagonally
41 inches
Approx. 130 measured diagonally
Rear Terminals
•
•
Centre speaker input terminals (2
terminals)
•
(L, R) audio outputs (phono jacks)
• i1/
21-pin Euro connector (CENELEC
standard) including audio/video
input, RGB input, TV audio/video
output.
input, RGB input, TV audio/video
output.
• i2/r 2
21-pin Euro connector (CENELEC
standard) including audio/video
input, S video input, selectable
audio/video output
audio/video output
• i3
21-pin Euro connector (CENELEC
(SMARTLINK)
standard) including audio/video
input, selectable audio / video
output (selectable the same output
source as i2/r 2 connector) and
Smartlink interface (41PX1/41PX1R)
input, selectable audio / video
output (selectable the same output
source as i2/r 2 connector) and
Smartlink interface (41PX1/41PX1R)
Front Terminals
t2 video input - phono jack
audio inputs - phono jacks
r 2 S video input - 4 pin DIN
Headphones jack - minijack stereo
Sound output
2 x 30 W (music power)
2 x 15 W (RMS)
2 x 30 W (music power)
2 x 15 W (RMS)
Centre SP input
30 W (RMS) (using as the centre speaker)
30 W (RMS) (using as the centre speaker)
Power consumption
145 W
145 W
Standby Power consumption
0.7 W
0.7 W
Dimensions (w x h x d)
Approx. 948 x 992 x 511 mm
Approx. 948 x 992 x 511 mm
Weight
Approx. 43 kg
Approx. 43 kg
Accessories supplied
1 Remote Control (RM-892) : 41PX1/41PX1K
1 Remote Control (RM-892) : 41PX1/41PX1K
(RM-862) : 41PX1R
2 Batteries (IEC designated)
Other features
Digital Comb filter (High resolution)
TELETEXT, Fastext, TOPtext
NICAM
Sleep Timer
Smartlink : 41PX1/41PX1K
Dolby Virtual
Digital Comb filter (High resolution)
TELETEXT, Fastext, TOPtext
NICAM
Sleep Timer
Smartlink : 41PX1/41PX1K
Dolby Virtual
Design and specifications are subject to change without notice.
C
2
– 3 –
KP-41PX1/41PX1K/41PX1R
K
RM-892
RM-892
RM-862
1. SELF DIAGNOSIS FUNCTION
......................
4
2. GENERAL
.................................................................
10
3. DISASSEMBLY
3-1.
Rear Board Removal .........................................
24
3-2.
Chassis Assembly Removal ..............................
24
3-3.
Service Position .................................................
24
3-4.
Terminal board Removal ..................................
25
3-5.
U (UE), A (AE) and D Boards Removal ...........
25
3-6.
E Board Removal ...............................................
26
3-7.
G Board Removal ...............................................
26
3-8.
Speaker Grille and
Resistor Assembly (Focus Pack) Removal ........
27
3-9.
H1 and H2 Boards Removal ..............................
27
3-10. Mirror Cover and Beznet Assembly Removal ....
28
3-11. High-Voltage Cable Removal and Installation ...
28
3-12. Picture Tube Removal ........................................
28
4. SET-UP ADJUSTMENTS
4-1.
Screen Voltage Adjustment
(Rough Alignment) ...........................................
29
4-2.
Focus Rough Adjustment ..................................
29
4-3.
Screen (G2) Adjustment ....................................
29
4-4.
Deflection Yoke Tilt Adjustment ......................
29
4-5.
2-Pole Magnet Adjustment (Green and Red) ....
30
4-6.
4-Pole Magnet Adjustment ................................
30
4-7.
Green, Red and Blue Focus Adjustment
4-7-1. Green, Red and Blue Lens Focus
Adjustment ....................................................
30
4-7-2. Green, Red and Blue Electrical Focus
Adjustment ....................................................
30
5. SAFETY RELATED ADJUSTMENT
5-1.
HV Hold Down Adjustment .............................
31
6. ELECTRICAL ADJUSTMENTS
6-1.
How to Enter the Service Mode
6-1-1. Adjustment Method with Commander ..........
32
6-1-2. Screen Display on the Test Menu ..................
32
6-1-3. Service List (Convergence) ...........................
34
6-2.
Registration Adjustment
6-2-1. Registration Adjustment Method ..................
37
6-2-2. Main Deflection Adjustment .........................
37
6-2-3. Sub Deflection Adjustment ...........................
38
6-3.
Horizontal Position Adjustment .........................
43
6-4.
Text Position Adjustment ...................................
43
6-5.
White Balance Adjustment ................................
44
6-6.
Sub Brightness Adjustment ................................
44
6-7.
Sub Contrast Adjustment (A or AE Board) .......
44
TABLE OF CONTENTS
7. DIAGRAMS
7-1.
Block Diagrams ..................................................
45
7-2.
Frame Schematic Diagram .................................
52
7-3.
Circuit Boards Location .....................................
54
7-4.
Schematic Diagrams and Printed Wiring
Boards .................................................................
Boards .................................................................
54
(1)
Schematic Diagram of A (1/5) Board
(41PX1/41PX1K) ...............................................
(41PX1/41PX1K) ...............................................
55
(2)
Schematic Diagram of A (2/5) Board
(41PX1/41PX1K) ..............................................
(41PX1/41PX1K) ..............................................
56
(3)
Schematic Diagram of A (3/5) Board
(41PX1/41PX1K) ...............................................
(41PX1/41PX1K) ...............................................
57
(4)
Schematic Diagram of A (4/5) Board
(41PX1/41PX1K) ...............................................
(41PX1/41PX1K) ...............................................
58
(5)
Schematic Diagram of A (5/5) Board
(41PX1/41PX1K) ..............................................
(41PX1/41PX1K) ..............................................
59
(6)
Schematic Diagram of AE (1/5) Board
(41PX1R) ............................................................
(41PX1R) ............................................................
64
(7)
Schematic Diagram of AE (2/5) Board
(41PX1R) ...........................................................
(41PX1R) ...........................................................
65
(8)
Schematic Diagram of AE (3/5) Board
(41PX1R) ...........................................................
(41PX1R) ...........................................................
66
(9)
Schematic Diagram of AE (4/5) Board
(41PX1R) ...........................................................
(41PX1R) ...........................................................
67
(10) Schematic Diagram of AE (5/5) Board
(41PX1R) ...........................................................
68
(11) Schematic Diagram of D (1/3) Board ................
73
(12) Schematic Diagram of D (2/3) Board ................
74
(13) Schematic Diagram of D (3/3) Board ................
75
(14) Schematic Diagram of E (1/4) Board ................
79
(15) Schematic Diagram of E (2/4) Board ................
80
(16) Schematic Diagram of E (3/4) Board ................
81
(17) Schematic Diagram of E (4/4) Board ................
82
(18) Schematic Diagram of ZG Board ......................
85
(19) Schematic Diagram of ZR Board .......................
86
(20) Schematic Diagram of CR Board ......................
87
(21) Schematic Diagram of CG Board ......................
88
(22) Schematic Diagram of CB Board ......................
89
(23) Schematic Diagram of U Board
(41PX1/41PX1K) ...............................................
90
(24) Schematic Diagram of UE Board
(41PX1R) ............................................................
91
(25) Schematic Diagram of H1 Board .......................
92
(26) Schematic Diagram of H2 Board .......................
93
(27) Schematic Diagram of G Board .........................
94
7-5.
Semiconductors .................................................
96
8. EXPLODED VIEWS
8-1.
Screen and Control Panel Block ......................
97
8-2.
Cabinet Block ....................................................
98
8-3.
Main Bracket Block ...........................................
99
8-4.
Mechaseal Block ................................................ 100
9. ELECTRICAL PARTS LIST
............................ 101
Section
Title
Page
Section
Title
Page
– 4 –
KP-41PX1/41PX1K/41PX1R
K
RM-892
RM-892
RM-862
SECTION 1
SELF DIAGNOSIS FUNCTION
Diagnostic Errors
The errors indicated below can be read using an Error Reader Display (Part Number S-188-900-10) connected to the service connector.
Once an error has been detected it will then be displayed on the two digit error reader.
During the power up procedure and during normal run time, the micro’s self diagnostic procedures monitor for various errors, as
described in the table below:
Error Number
Error Description
00
No error (TV Error Reader shows 00 in normal condition)
01
Not allowed (may be confused with SIRCS response flash on LED)
02
Protection circuit trip (Any time)
03
Reserved
04
No Vertical Synchronism
05
AKB
06
IIC SCL Low < Power Up Only >
07
IIC SDA Low < Power Up Only >
08
IIC SDA & SCL Low < Power Up Only >
09
Jungle controller no acknowledge < Power Up Only >
10
Video Switch (CXA2040) no acknowledge < Power Up Only >
11
Tuner no acknowledge
12
MSP no acknowledge
13
NVM no acknowledge
14
AV Switch (CXA2089) no acknowledge
15
Digital micro no acknowledge
16
Port Expander (CXA1875) no acknowledge
17
Multiple devices with no acknowledge <Power Up Only>
18
Cannot initialize jungle (after initial power on check OK) - < Chassis Initialization >
19
Jungle controller response failure after power up check (+9V) test
20
Video Switch (CXA2040) cannot power on reset - < Chassis Initialization >
21
Video Switch (CXA2040) response failure after power up check (+9V)
22
NVM acknowledge fail after initialization (STBY +5V)
23
MSP run-time failure < May Not Be Fatal - Display On Error Reader >
24
DSP run-time failure < May Not Be Fatal - Display On Error Reader >
25
M3L bus Clock low time out after data send < Run-Time Failure >
26
M3L bus Clock low time out after data send < At Power Up Check >
27
M3L bus Clock low time out after data send < At Initialization >
28
M3L Txd Low < Power Up Only >
29
M3L Rxd Low < Power Up Only >
30
M3L Enable Low < Power Up Only >
31
Compact Text test fail < Power Up Only >
32
Compact Text does not respond (+5V test)
33
Compact text run-time failure < May Not Be Fatal - Display On Error Reader >
