Read Sony KP-41DS1U / KP-41PZ1B / KP-41PZ1D / KP-41PZ1E Service Manual online
– 8 –
KP-41DS1U/PZ1B/PZ1D/PZ1E
K
RM-892
TT command table
TT Mode is available by pressing the test key twice. It is exited by pressing 0 twice, or by pressing the Test key, or by pressing the TV
key or by switching the set into standby.
Pressing the Menu key when in TT mode enters in main Test Menu. Pressing the Menu key again enters in the User Menus.
TT Modes 40-49 require TV to be in program 59 before the command is accepted. Some Test models are dependant upon the model.
TT command
Meaning
<Menu>
Enter into service menu
00
Exit from TT mode
01
Set picture level to maximum
02
Set picture level to minimum
03
Set volume to 35%
04
Set volume to 50%
05
Set volume to 65%
06
Set volume to 80%
07
Ageing mode enable / disable
08
Shipping condition
09
Reset language select menu on power up
11
Sub Picture adjustment (use red / yellow)
12
Sub Colour adjustment (use red / yellow)
13
Sub Brightness adjustment (use red / yellow)
14
Text H-Position
16
Picture level 50 %
21
Destination A/D (East Menu / West Text)
22
Destination L (West Menu / West Text)
23
Destination E ( West Menu / West Text)
24
Destination U (West Menu / West Text)
25
Destination D (East Menu / Greek Text)
26
Destination B (East Menu / West Text)
27
Destination K (East Menu / East Text)
28
Destination R (Russian Menu / Russian Text)
32
Digital Status on/off
41
Re-initialize NVM
42
Re-initialize Geometry settings
43
Default programme info in NVM with Pencoed factory channel setup
44
Default favourite pages to 100, 101, 102, 103
45
Switch off all Channel Locks
46
Dealer commander mode (pending)
47
Default MSP Settings
48
Restore NVM test byte Undo TT49
49
Delete NVM test byte Sets virgin NVM
52
Noise on Left Speaker
53
Noise on Right Speaker Only
Click on the first or last page to see other KP-41DS1U / KP-41PZ1B / KP-41PZ1D / KP-41PZ1E service manuals if exist.