KP-41DS1U, KP-41PZ1B, KP-41PZ1D, KP-41PZ1E - Sony TV Service Manual (repair manual). Page 21

Read Sony KP-41DS1U / KP-41PZ1B / KP-41PZ1D / KP-41PZ1E Service Manual online

–
 21 
–
28
Optional Connections
Smartlink
Smartlink is a direct link between your projection TV set and a VCR.
For Smartlink you need:
• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to the Euro AV connector 
:3 on
the rear of the Projection TV.
The features of Smartlink are:
• Tuning information such as the channel overview are downloaded from the projection
TV set to the VCR.
• Direct projection TV recording: While watching TV you need to press just one button on
the VCR to record this programme.
• Projection TV in standby mode: Press the "Play 
z" button on your VCR to switch the TV
automatically on.
If you have connected a decoder to a VCR which supports Smartlink feature, select
the menu Further Programme Preset in the 
 (PRESET) menu and select DECODER
AV
3
 to each codified channel. For more details, please refer to the section "Using the
Further Programme Preset function" of this instruction manual.
For more information on Smartlink, please refer to the Instruction Manual of your
VCR.
Optional Connections
VCR
Remote Control of other Sony Equipment
Using the buttons underneath the cover of the remote control you can
control other Sony equipment.
1
Open the cover of the Remote Control.
2
Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1
Beta VCR
VTR 2
8 mm VCR
VTR 3
VHS VCR
VTR 4
Digital Video (DCR-VX 1000/9000 E, VHR-1000)
DVD
Digital Video Disk
3
Use the buttons underheath the cover of the on the remote control to operate the
equipment.
• If your video equipment has a COMMAND MODE selector, set this
selector to the same position as the VTR 1234 DVD selector on the
TV Remote Control.
• If the equipment does not have a certain function, the corresponding
button on the remote control does not work.
Decoder
VIDEO
TV
VTR 1 2 3 4  DVD
CH
CH
VTR 1 2 3 4  DVD
Rear of projection TV
29
S
RM 892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO
TV
Optional Connections
Selecting the output source for the Euro AV connectors
1
Press the MENU button on the remote control to display the menu
on the screen.
2
Push the joystick to 
$ to select the 
 
 symbol, then push to 
z
button to enter to the VIDEO CONNECTION menu screen.
3
Push the joystick to 
$ or 4 button to highlight:
TV Screen
(input source for the TV screen) or
Output
(output source available for 
:2/q 2 and :3 Euro
AV connectors).
Push the joystick to 
z to confirm.
4
Push the joystick to 
Z or z repeteadly to select the desired source:
TV Screen TV, AV1, RGB, AV2, YC2 or AV3
Output
TV, AV1, AV2, YC2, AV3
 or AUTO
Then press the OK button to confirm.
If you select "AUTO", the output signal will be always the same
one that is displayed on the screen.
If you have connected a decoder, please remember to set back
the Output to "TV" for a correct unscrambling.
5
Press the MENU button to exit and return to the normal TV screen.
  The selected signal is available for your optional equipment connected to
the appropriate Euro AV connector.
Optional Connections
Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV
connectors 
:2/q 2 or :3 placed on the rear of the projection TV.
In that case you have to select the output source as described below (if your VCR support Smartlink, this procedure is not
necessary).
PICTURE  CONTROL
Personal
Wide
Picture Mode
Contrast
Reset
Format
VIDEO  CONNECTION
[TV   - - - - - - -]
[AV1 - - - - - - -]
TV Screen
Output
TV
AV1
Display
Click on the first or last page to see other KP-41DS1U / KP-41PZ1B / KP-41PZ1D / KP-41PZ1E service manuals if exist.
Random: