Read Sony KLV-60EX640 Service Manual online
KLV-60EX640(CH)
17
SEC 2. ADJUSTMENT
HOW TO ENTERING SERVICE MODE
1) Turn on the main power switch to place this set in standby mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
3) Service mode display.
Service Mode
Status Information
>>
Self diagnosis history
>>
Panel Selection
<[
62_60xxxxxxx
]>
NO_SIGNAL_MUTE
<[
Off
]>
TUNING SYSTEM
<[
AUTO
]>
LVDS Spectrum (%o)
<[
25
]>
Low of HPD
<[
5
]>
UART Selection
<[
Factory
]>
SERIAL NUMBER EDID
xxxxxxx
MODEL NAME EDID
KLV‐60EX640
[</>]Set[Home]Exit
5
Info
TV POWER
Channel
Volume
4) How to use the remote commander.
5) After entering service mode, then turn off the power switch.
Function
The flow of control
Service mode on
<Info><5><Vol Up><Power>
Service mode off
<Other> / <Power off + on>
Adjustment Item up / down
/
Data Value up / down
/
Note: When replace Main Board or panel, please confirm "Panel Selection" and "MODEL NAME EDID" in service mode.
If they are different, please select a suitable thing.
Click on the first or last page to see other KLV-60EX640 service manuals if exist.