KLV-46XBR9, KLV-52XBR9 - Sony TV Service Manual (repair manual). Page 19

1   Remove LVDS cable and holder from TCON and LCD panel

2   Remove 5 screws and release LCD panel from Front Cabinet Assembly (KLV-46XBR9 Only)

 

Remove 6 screws and release LCD panel from Front Cabinet Assembly (KLV-52XBR9 Only)

3   Disconnect 1 connector from HL5 Board and release from Front Cabinet Assembly

4   Disconnect 1 connector from Illumination Module and remove from Front Cabinet Assembly

5   Remove 4 screws and detach 2 Heat Sinks from LCD Panel

6   Gently remove Radiation Sheets

 

NOTE: Heat Sink, Radiation Sheet and Insulating Sheet are not included with the LCD Panel and must be replaced when 
replacing the LCD panel. For part number information, refer to the Exploded View Section of this manual.

Insulating 
Sheet (D)

Insulating Sheet (G)

LCD Panel

Front Cabinet

Assembly

Illumination 
Module

HL5

Radiation

Sheet

6

4

3

5

Screw,

+PSW M3X8

Double Sided Tape

Insulating Sheet (D) Detail

Insulating Sheet (G) Detail

KLV-46XBR9 ONLY

KLV-52XBR9 ONLY

2

Screw,
+BVTP2 4X16

Soft Cloth

1