Read Sony KLV-40ZX1 (serv.man2) Service Manual online
SERVICE MANUAL
EG1W
CHASSIS
LCD Colour TV
MODEL
KLV-40ZX1
COMMANDER
RMF-GA001
DEST.
GE
MODEL
COMMANDER
DEST.
MONITOR
(LDM-Z401A)
RMF-GA001
MEDIA RECEIVER
(MBT-W1A)
KLV-40ZX1 (GE) 2
SPECIFICATIONS
* Specified standby power is reached after the TV finishes necessary internal processes.
Model name
MBT-W1A
System
TV System
D/K, I, B/G, M
Colour System
PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
Channel Coverage
D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to
S41, Z1 to Z39
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G: VHF: E2 to E12 / UHF: E21 to E69 / CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
B/G: VHF: E2 to E12 / UHF: E21 to E69 / CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
Input/Output jacks
Antenna
75 ohm external terminal for VHF/ UHF
S video input (4-pin mini DIN)
Video input (phono jack)
Audio input (phono jacks)
COMPONENT IN
Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P
B
/C
B
: 0.7 Vp-p, 75 ohms/P
R
/C
R
: 0.7 Vp-p, 75 ohms
Audio input (phono jack) 500 mVrms
HDMI IN 1, 2, 3
Video: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
IR BLASTER
3.5 mm minijack
USB port
Power and others
Power Requirements
AC adaptor: 100-240V AC, 50/60Hz
Media receiver: DC18V
Media receiver: DC18V
Power Consumption
24 W
Standby Power Consumption*
2 W or less (23W when “Quick Start” is “ON”)
Dimensions
(w
× h × d)
for vertical
placement with
stand
placement with
stand
131
× 302 × 286
mm
for horizontal
placement
placement
280
× 72 × 286
mm
Mass (Approx.) for vertical
placement with
stand
stand
2.6
kg
for horizontal
placement
placement
2.5
kg
(Approx.)
KLV-40ZX1 (GE) 3
* Specified standby power is reached after the unit finishes necessary internal processes.
Model name
LDM-Z401A
Panel System
LCD (Liquid Crystal Display) Panel
Sound Output
5 W+ 5 W + 10 W (woofer)
Monitor HDMI IN
Video: 1080/24p, 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC Input
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC Input
Power and others
Power Requirements
110-240 V AC, 50/60 Hz
Viewing Screen Size (measured
diagonally)
diagonally)
40 inches (Approx. 101.6 cm)
Display Resolution
1,920 pixels (horizontal)
× 1,080 lines (vertical)
Power Consumption
195W
Standby Power Consumption*
0.5 W or less (21 W when “Quick Start” is “ON”)
Dimensions
(Approx.)
(Approx.)
with Table-Top
Stand
Stand
986
× 682 × 307
mm
without Table-Top
Stand
Stand
986
× 599 × 28
mm
Mass (Approx.) with Table-Top
Stand
15.0
kg
without Table-Top
Stand
Stand
12.2
kg
Optional accessories
SS-WAL700 Speaker System, SU-WL700 Wall-Mount Bracket
System
Input/Output jacks
(w
× h × d)
Wireless system
Transmission system
OFDM, CCK, QPSK, BPSK
Carrier frequency
2.412 to 2.472 GHz
Transmission distance
30 cm to 20 m (depending on installation / usage)
PC Input Signal Reference Chart for MONITOR HDMI
Resolution
Signals
Horizontal
(Pixel)
(Pixel)
×
Vertical (Line)
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
×
480
31.5
60
VGA
SVGA
800
×
600
37.9
60
VESA Guidelines
XGA
1024
×
768
48.4
60
VESA Guidelines
WXGA
1280
×
768
47.4
60
VESA
WXGA
1280
×
768
47.8
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
KLV-40ZX1 (GE) 4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
