Read Sony KLV-40V510A / KLV-46V510A (serv.man2) Service Manual online
13
KLV-40V510A/46V510A/52V510A
KLV-40V510A/46V510A/52V510A
1-1-2. (KLV-52V510A ONLY)
1 Remove 20 screws from Rear Cover
2 Remove 1 screw from Side Jack position
3 Remove 1 screw from Terminal position
4 Remove 4 screws from Rear Cover
5 Remove 4 screws from Rear Cover
NOTE: The Rear Cover is attached to the Bezel Assembly with three small tabs.
Use caution when removing the Rear Cover not to damage these tabs.
1-2. SWITCH
UNIT
REMOVAL
1 Slide out Switch unit from Bezel
2 Disconnect 1 connector from HW3 Board and remove 4 screws
1
Screw,
+BVTP2 4X16
+BVTP2 4X16
2 Screw,
+BVTP 3X12 TYPE2 IT-3
4
Screw,
+PSW M4X12
+PSW M4X12
5
Screw,
+PSW M5X16
+PSW M5X16
3 Screw,
+BVTP 3X12 TYPE2 IT-3
Rear Cover
Bezel
Tab Inserts
Bezel
Switch Unit
1
2
Click on the first or last page to see other KLV-40V510A / KLV-46V510A (serv.man2) service manuals if exist.