Read Sony KLV-40S400A Service Manual online
– 5 –
KLV-40S400A
RM-GA011
PICTURE OFF/
TIMER
REMOTE/LIGHT SENSOR
STANDBY
POWER
MENU TV/VIDEO
VOLUME
CHANNEL
POWER
SECTION 2
SELF DIAGNOSTIC FUNCTION
2-4. LED Pattern
When safety shutdown occurs, Standby LED display reports the
cause by using the blinking patterns as indicated below.
When safety shutdown occurs, Standby LED display reports the
cause by using the blinking patterns as indicated below.
Example:
The figure above shows LED display when
SHUTDOWN is caused by DC_ALERT 2. It repeats
flashing for a specified number of times in 0.3sec/
cycle and has a 2 seconds interval of lighting off.
Please note that a 2 seconds interval of lighting off
is fixed regardless of abnormal state types.
SHUTDOWN is caused by DC_ALERT 2. It repeats
flashing for a specified number of times in 0.3sec/
cycle and has a 2 seconds interval of lighting off.
Please note that a 2 seconds interval of lighting off
is fixed regardless of abnormal state types.
2.0 sec
2.0 sec
0.3 sec
0.3 sec
2-1. Overview of Control Buttons
LED Type Description
Remark
Status
Display
Power LED
Remark
POWER
Green: One LED Green lights at power ON.
STANDBy
Red: One LED
Red lights during standby.
Timer
Green/Amber
: Two LEDs
: Two LEDs
Green lights during Picture
OFF and amber lights
during Timer activation.
OFF and amber lights
during Timer activation.
POWER ON Green lights
OFF
in a normal state.
STANDBY
OFF
Red lights
Microcomputer is
in a sleep state.
Failure
Classify the
causes by
the no. of red
blinking.
causes by
the no. of red
blinking.
Standby LED
Microcomputer is
2-2. LED Display Specification
2-3. LED Display Control
Click on the first or last page to see other KLV-40S400A service manuals if exist.