Read Sony KLV-40S310A Service Manual online
– 20 –
KLV-40/S, 40S310A
RM-GA008
i+
5
+
+
+
+
–
(CH 5)
(ON SCREEN
DISPLAY)
(STBY)
(POWER)
(VOLUME –)
SECTION 3
SERVICE ADJUSTMENTS
3-1.
How to enter Service Mode
3-1-1.
Service adjustments to this model can be
performed using the supplied Remote
Commander RM-GA008
performed using the supplied Remote
Commander RM-GA008
1. Turn on the power to the TV set and enter into the stand-by mode.
2. Press the following sequence of buttons on the Remote
2. Press the following sequence of buttons on the Remote
Commander.
3. The following menu will then appear on the screen.
4. Move to the relevant command using the up or down arrow buttons
on the remote commander.
5. Press the right arrow button to enter into the required menu item.
6. Press the ‘Menu’ button on the remote commander to quit the
6. Press the ‘Menu’ button on the remote commander to quit the
service mode when all adjustments have been completed.
Note:
–
–
After carrying out the service adjustments, to prevent the customer
accessing the ‘Service Menu’ switch the TV set OFF and then
ON.
accessing the ‘Service Menu’ switch the TV set OFF and then
ON.
3-1-2.
Aging
1. Aging setting
i.
Set no signal and monitor as aging mode.
2. Aging condition
i.
Aging condition before white balance adjustment is as
follows;
Supply Voltage : Rating
Time
follows;
Supply Voltage : Rating
Time
: 20 minutes or over
(AGING_TIMER registor setting)
Ambient temp : 22 ~ 28
°
C
Brightness
: Brightness is set by aging mode
Input
: Set no signal except digital and analog RF
(video/component/PC)
DC_DET
0
DC_ALERT1
0
DC_ALERT2
0
DC_ALERT3
0
BACKLIGHT
0
TEMPERATURE
0
AUDIO
0
DFE
0
B-ENGINE
0
HFR
0
3. LED lighting pattern during aging
In case that AGING_TIMER > 0
Green (0.5s)
➔ off (0.5s) ➔ Green (0.5s) ➔ off (0.5s)
Notes: Green (Power LED is ON/OFF)
In case that AGING_TIMER = 0
Green (3.0s)
Green (3.0s)
➔ off (3.0s) ➔ Green (3.0s) ➔ off (3.0s)
Notes: Green (Power LED is ON/OFF)
Note:
If set has been put on surface down, brightness surface irregularity is
caused by static electricity. If so be, turn set over or keep it upright
more than 30 seconds. As surface irregularity is vanished away, then
check the set.
If set has been put on surface down, brightness surface irregularity is
caused by static electricity. If so be, turn set over or keep it upright
more than 30 seconds. As surface irregularity is vanished away, then
check the set.
3-2.
Accessing the Service Adjustment Menus
1. Turn on the power to the TV set and enter into standby mode.
2. Press the following sequence of buttons on the Remote
2. Press the following sequence of buttons on the Remote
Commander (RM-GA008).
3. The following menu will then appear on the screen:
4. Use the
. button to view the next category listing the white balance
adjustment items:
MAIN VER.
1000
BOOT VER.
1000
H PACK VER
1000
S PACK VER
1000
CHECK SUM
ABCD
NVM VER.
1000
USB VER
0.0.30
ETI1
65535h
ETI2
65535h
TEMPERATURE
i+
5
+
+
+
+
–
(CH 5)
(ON SCREEN
DISPLAY)
(STBY)
(POWER)
(VOLUME –)
R_DRIVE
256
G_DRIVE
256
B_DRIVE
256
R_BKG
512
G_BKG
512
B_BKIG
512
COLOR SAVE
Click on the first or last page to see other KLV-40S310A service manuals if exist.