Read Sony KLV-32EX330 / KLV-32EX33A / KLV-32EX33B / KLV-40EX430 / KLV-40EX43A / KLV-40EX43B Service Manual online
KLV- 32 EX330, EX33A, EX33B, 40 EX430, EX43A, EX43B
RM-GA022
Safety Notes
1-13 WIRE DRESSING AND CAUTION FOR CONNECTOR ASSY 15P (B-U1 HARNESS) 1-910-803-02 & 1-910-802-47 (KLV-32 EX330 EX33A EX33B)
1 13. WIRE DRESSING AND CAUTION FOR CONNECTOR ASSY 15P (B U1 HARNESS), 1 910 803 02 & 1 910 802 47 (KLV 32 EX330, EX33A, EX33B)
(1) Dressing sequence change for speaker harness and B-U1 harness .
Speaker harness
B-U1 harness
-Do not press the harness at other area except for
the area to be slot in the slit .
-Do not use strong force to slot in the wire in the
-Do not use strong force to slot in the wire in the
slit.
-Do not push the harness
until the bottom of the rib.
-This is to prevent terminal
-This is to prevent terminal
from come out from housing
B-U1 harness is dressed on top of
the speaker harness as shown in the
B-U1 harness is dressed below the
speaker harness as shown in the picture
C
from come out from housing
and to prevent from giving
extra stress to the harness.
p
picture above
AFTER
speaker harness as shown in the picture
above
BEFORE
Note: Please check whether you have made changes item to ensure that.
(2) Process sequence and caution for wire harness dressing for Connector Assy
C)Slot the wire into slit. Make sure the harness is in the slit by
pressing the thumb to the rib at the slit area.
OK
NG
OK
(2) Process sequence and caution for wire harness dressing for Connector Assy
15P,1-910-803-02 & 1-910-802-47.
Do not pull the wire from the housing after the
harness housing is connected to the header.
U1
Main
NG
Slit
Harness
A
U1
Board
Main
Board
Harness is placed just
right below the slit
Harness is pushed deeply
downward in the slit
Harness
Slit
A) Once B-U1 harness is connected to the
B) If there is any extra length,
B
Speaker
79
housing, make sure the harness is straight and
away from the speaker before slot in the slit.
please make sure the extra length
is at the circled area.
Click on the first or last page to see other KLV-32EX330 / KLV-32EX33A / KLV-32EX33B / KLV-40EX430 / KLV-40EX43A / KLV-40EX43B service manuals if exist.