Read Sony KLV-26T400A / KLV-26T400G / KLV-32T400A Service Manual online
– 11 –
KLV-26T400A, T400G, 32T400A
RM-GA013
4-1-6. AC Power Cord Wire Dressing (Before installing G1 Bracket with GPT PWB)
4-1-7. Conn Assy 10P Dressing (Before installing
G1 Bracket with GPT PWB)
G1 Bracket with GPT PWB)
1) Install AC cord holder to AC power cord at specified position
as shown.
as shown.
1) Install Ferrite core to AC power cord at specified position as shown
2) Next, install AC cord holder to AC power cord at specified position.
2) Next, install AC cord holder to AC power cord at specified position.
Dress Conn Assy 10P below Spine, Frame.
Next, attach Tape, LCD (X2) to Conn Assy 10P as shown.
Next, attach Tape, LCD (X2) to Conn Assy 10P as shown.
CAUTION:
1. Ensure that AC power cord is not stressed whilst
inserting it into AC cord bracket.
1. Ensure that AC power cord is not stressed whilst
inserting it into AC cord bracket.
Non-CISPR model
CISPR model
510 ± 5mm
360± 5mm
Ferrite Core
CISPR models only
Attach Tape, Shield to AC Power Cord (X2)
400 ± 5mm
1
1
Attach Sheet Core, C (X2) to
AC Power Cord
Do not cover the
screw holes
with the Sheet Core, C
screw holes
with the Sheet Core, C
Use edge of Inverter board's cover and AC power cord connector
as a guideline for placement of power cord
Use edge of Inverter board's cover and AC power cord
connector as a guideline for placement of power cord
1. Attach Tape, Shield to AC
Power Cord (X2)
Caution:
Do not cover the
screw holes with the
Sheet Core, C
screw holes with the
Sheet Core, C
Caution:
2. Attach Sheet Core, C (X2) to
AC Power Cord. Make sure both
Sheet Core, C overlaps the two
Dress Conn Assy
10P underneath
Spine, Frame
Ensure Conn Assy
10P passes through
the slot on main
bracket
Attach Tape, LCD (X2) to Conn Assy 10P
AC Cord Holder
2
AC Cord Holder
Click on the first or last page to see other KLV-26T400A / KLV-26T400G / KLV-32T400A service manuals if exist.