Read Sony KLV-26NX400 / KLV-32NX400 / KLV-32NX500 / KLV-40NX500 (serv.man2) Service Manual online
– 5 –
KLV-26,32 NX400(S/B), 26,32 NX400(S/B)/S, 32,40 NX500
RM-GA018
SECTION 2
SELF DIAGNOSTIC FUNCTION
2-4. LED Pattern
When safety shutdown occurs, Standby LED display reports the
cause by using the lightning patterns as indicated below.
cause by using the lightning patterns as indicated below.
Example:
The figure above shows LED display when
SHUTDOWN is caused by Balancer Error. It repeats
flashing for a specified number of times in 0.5sec/
cycle and has a 3 seconds interval of lighting off.
Please note that a 3 seconds interval of lighting off
is fixed regardless of abnormal state types.
SHUTDOWN is caused by Balancer Error. It repeats
flashing for a specified number of times in 0.5sec/
cycle and has a 3 seconds interval of lighting off.
Please note that a 3 seconds interval of lighting off
is fixed regardless of abnormal state types.
3.0 sec
3.0 sec
0.5 sec
0.5 sec
2-1. Overview of Control Buttons
2-2. LED Display Specification
2-3. LED Display Control
PROG
Power
Programme
Volume
Input select/
Enter
Enter
Menu
Remote
Sensor
Picture Off/
Timer indicator
Standby
indicator
Power
indicator
LED Typ e
Description
Remark
Status
Display
Power LED
Remark
POWER
Green: LED
Green lights at power ON.
STANDB
Timer
Y
Red: One LED
Red lights during standby.
Orange
: One LED
: One LED
Orange lights
during Timer activation.
during Timer activation.
POWER ON Green lights
OFF
in a normal state.
STANDBY
OF
OFF
F
Red lights
Red flashes
Microcomputer is
in a sleep state.
Failure
Classify the trouble
causes by the no.
of red blinking.
causes by the no.
of red blinking.
Standby LED
Microcomputer is
Click on the first or last page to see other KLV-26NX400 / KLV-32NX400 / KLV-32NX500 / KLV-40NX500 (serv.man2) service manuals if exist.