KLV-26HG2 - Sony TV Service Manual (repair manual)

klv-26hg2 service manual
Model
KLV-26HG2
Pages
90
Size
8.26 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
klv-26hg2.pdf
Date

Read Sony KLV-26HG2 Service Manual online

SERVICE MANUAL
SPECIFICATIONS
KLV-26HG2
LCD Colour TV
UC Model
Television system:
American TV standard
Channel coverage:
VHF: 2-13/UHF: 14-69/CATV: 1-125
Antenna:
75 ohm external terminal for VHF/UHF
Screen size (measured diagonally):
26 inches
Panel System:
a-Si TFT Active Matrix LCD panel
(Effective dots: more than 99.99%)
Display resolution:
1280 dots (horizontal)  x 768 lines (vertical)
VIDEO 1/2 IN:
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced,
sync negative
C: 0.286 Vp-p (Burst signal),
75 ohms
VIDEO:
1 Vp-p, 75-ohms unbalanced,
sync negative
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
VIDEO 3 IN:
Y, P
B
, P
R
(Component  Video ) IN
:
:
Y: 1.0 Vp-p, 75 ohms
unbalanced, sync negative
P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms
Signal format:
480i, 480p, 720p, 1080i
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
VIDEO 4 IN:
DVI-HDTV:
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
1 terminal, 3.3V T.M.D.S,
   50 ohms
The DVI-HDTV input terminals
   compliant with the EIA-861B
   standard and is not intended for
   use with PC.
KLV-26HG2 (UC)      2
Power requirement:
120 V AC, 60 Hz
Power consumption:
In use:
118 W
In standby:
Less than 1W
AUDIO OUT:
500 mVrms (100% modulation)
More than 500 mVrms at the maximum volume setting
 (Variable)
More than 500 mVrms (Fixed)
Headphones:
Stereo minijack
Impedance: 16 ohms
Speaker:
Full range:               4.0 x 10.0 cm 0val
1
/
4
 inches) (2)
(
31
/
32
 inches) (2)
Speaker output:
4.0 W x 4.0 W
Tweeter:                  ø2.5 cm 
(1
Dimensions (W/H/D):
Including TV stand and rear cover:
790 x 490 x 240 mm
(31 
3
/
32
 x 19 
9
/
32
 x 9
7
/
16
 inches)
Without TV stand and rear cover:
790 x 430 x 138 mm
(31 
3
/
32
 x 16 
15
/
16
 x 5 
7
/
16
 inches)
Mass:
Including TV stand and rear cover:
790 x 490 x 240 mm kg
Without TV stand and rear cover:
12.2 kg (26 lb 14 oz)
Supplied accessories:
Remote control RM-1105 (1)
size AA Batteries (2)
75-ohm coaxial cable (1)
AC power cord (1)
Rear cover (1)
Operating Instructions
Warranty Card
Optional accessorios:
Note that some optional accessories may be out of
stock.
Headphones plug adaptor
Connecting cables
"Memory Stick" media
Wall-Mount Bracket SU-LW1
Design and specifications are subject to change
without notice.
Product Registratuin
KLV-26HG2 (UC)
3
WARNING AND CAUTIONS
CAUTION
These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock, do not perform any 
servicing other than that contained in the operating instructions unless you are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of 
this receiver is directly connected to the ac power line.
!
SAFETY-RELATED COMPONENT WARNING!!
Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe 
operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements 
published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures 
whenever critical components are replaced or improper operation is suspected. 
ATTENTION!!
Ces instructions de service sont à l’usage du personnel de service qualifié seulement. Pour prévenir le risque de choc électrique, ne 
pas faire l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifié faire ainsi.
Afin d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout 
dépannage. Le chássis de ce récepteur est directement raccordé à l’alimentation du secteur
ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!
Les composants identifies par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces 
sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero 
de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance
est critique pour la securite du fonctionnement sont identifies dans le present manuel. Suivre ces procedures lors de chaque 
remplacement de composants critiques, ou lorsqu’un mauvais fonctionnement suspecte.
KLV-26HG2 (UC)
4
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground
and from all exposed metal parts to any exposed metal part
having a return to chassis, must not exceed 0.5 mA (500
microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or
RCA WT-540A. Follow the manufacturers’ instructions to
use these instruments.
2. A battery-operated AC milliammeter. The Data Precision
245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indica-
tion is 0.75 V, so analog meters must have an accurate low-
voltage scale. The Simpson 250 and Sanwa SH-63Trd are
examples of a passive VOMs that are suitable. Nearly all
battery operated digital multimeters that have a 2 V AC
range are suitable.  (See Fig. A)
After correcting the original service problem, perform the fol-
lowing safety checks before releasing the set to the customer:
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections. Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Check that all control knobs, shields, covers, ground straps,
and mounting hardware have been replaced. Be absolutely
certain that you have replaced all the insulators.
4. Look for unauthorized replacement parts, particularly tran-
sistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
5. Look for parts which, though functioning, show obvious
signs of deterioration. Point them out to the customer and
recommend their replacement.
6. Check the line cords for cracks and abrasion. Recommend
the replacement of any such line cord to the customer.
7. Check the B+ and HV to see if they are specified values.
Make sure your instruments are accurate; be suspicious of
your HV meter if sets always have low HV.
8. Check the antenna terminals, metal trim, “metallized”
knobs, screws, and all other exposed metal parts for AC
Leakage. Check leakage as described right.
SAFETY  CHECK-OUT
Fig. A. Using an AC voltmeter to check AC leakage.
1.5 k 
0.15 µF
AC
Voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
WARNING!!
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
    ON THE SCHEMATIC DIAGRAMS, EXPLODED
VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS AP-
PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY. CIRCUIT ADJUST-
MENTS THAT ARE CRITICAL FOR SAFE OPERATION
ARE IDENTIFIED IN THIS MANUAL. FOLLOW THESE
PROCEDURES WHENEVER CRITICAL COMPONENTS
ARE REPLACED OR IMPROPER OPERATION IS SUS-
PECTED.
AVERTISSEMENT!!
ATTENTION AUX COMPOSANTS RELATIFS À LA
SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE TRAME ET
UNE MARQUE ! SONT CRITIQUES POUR LA
SÉCURITÉ. NE LES REMPLACER QUE PAR UNE
PIÈCE PORTANT LE NUMÉRO SPECIFIÉ. LES
RÉGLAGES DE CIRCUIT DONT L’IMPORTANCE EST
CRITIQUE POUR LA SÉCURITÉ DU
FONCTIONNEMENT SONT IDENTIFIÉS DANS LE
PRÉSENT MANUEL.  SUIVRE CES PROCÉDURES
LORS DE CHAQUE REMPLACEMENT DE
COMPOSANTS CRITIQUES, OU LORSQU’UN
MAUVAIS FONCTIONNEMENT EST SUSPECTÉ.
Page of 90
Display

Download Sony KLV-26HG2 Service Manual (Repair Manual)

Here you can read online and download Sony KLV-26HG2 Service Manual in PDF. KLV-26HG2 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony KLV-26HG2 TV. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.