Read Sony KLV-22P413D / KLV-24P413D / KLV-24P423D Service Manual online
SERVICE POSITION
9
As for this model, the bottom of rear cover is installed between the stand assy and the panel. Therefore according to the following
procedure when performing adjustment and operation check after the part replacement.
procedure when performing adjustment and operation check after the part replacement.
1. Make sure no mess things
under the front set.
under the front set.
2. Remove all screws on the Stand to
main unit (three screws)
7-682-964-09 SCREW,+PSW M4x14
3PCS
2-580-592-01 SCREW, +PSW M3X8 W6
4PCS
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 4PCS
Attention: This photo is based on Sony criteria for appearing
standing the main unit after removing back cover and
assembling the stand. But considering mechanical design of
MC2 models and normal service process, it is not
recommended to keep main unit standing by this status for
repairing/testing at repair center. Please pay attention for
avoiding possible scratch/deformation occurred.
standing the main unit after removing back cover and
assembling the stand. But considering mechanical design of
MC2 models and normal service process, it is not
recommended to keep main unit standing by this status for
repairing/testing at repair center. Please pay attention for
avoiding possible scratch/deformation occurred.
Note: Remove rear cover, then assemble the stand to main unit. This will cause the stand with
main unit fit closely, scratch or deformation may occurred easily on the stand or bezel deco.
main unit fit closely, scratch or deformation may occurred easily on the stand or bezel deco.
KLV-22P413D/KLV-24P423D/KLV-24P413D
KLV-22P413D/24P413D/24P423D(IN5)
Click on the first or last page to see other KLV-22P413D / KLV-24P413D / KLV-24P423D service manuals if exist.