KLV-22BX350, KLV-26BX350, KLV-32BX350, KLV-40BX450, KLV-46BX450 - Sony TV Service Manual (repair manual). Page 123

 GB

KLV-22/26/32BX350_22/26/32CX350_40/46BX450_40CX450_32BX35A

4-411-978-12(1)

The Control for HDMI function enables the TV to communicate with the connected equipment that is compatible 
with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment 
that is compatible with Control for HDMI (with HDMI cables), you can control them together.
Be sure to connect the equipment correctly, and make the necessary settings.

•

Automatically turns the connected equipment off when you switch the TV to standby mode using the remote.

•

Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to 
play.

•

If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to 
the audio system.

•

Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system.

•

You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote. Possible 
operations with BRAVIA Sync buttons, see page 8.

– Refer to the instruction manual of the equipment for available control.

•

If “Control for HDMI” of the TV is set to “On”

,

 “Control for HDMI” of the connected equipment is also 

automatically switched to “On”.

The Control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” 
(page 26) for the TV side settings. For settings on the connected equipment, refer to its operating instructions.