Read Sony KLV-20S400A Service Manual online
– 9 –
KLV-20S400A
RM-GA011/W
SECTION 4
WIRE DRESSING
CAUTION :
1. Do not overpull the wires during dressing
1. Do not overpull the wires during dressing
--> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
high-temperature parts.
high-temperature parts.
4-1. Wire Dressing Overview
(for Non-CISPR model).
4-2. Wire Dressing Overview
(for CISPR model).
4-3. Dress LVDS cable with Sheet Core C
(for Non-CISPR model).
4-4. Dress LVDS cable with Sheet Core C &
Shield Tape (For CISPR model).
4-5. Insert wire from panel to inverter board and
make sure wire color is matching with
color on connector.
4-6. Dress Connector Assy 14P+20P with
Sheet Core C.
Sheet Core C
LVDS cable
Datum
OK
NG
OK
NG
Sheet Core C
LVDS cable
Datum
Make sure LVDS connector fully
inserted
with correct direction as shown.
inserted
with correct direction as shown.
Use edge of UL tape
as guide line
as guide line
Make sure LVDS connector fully inserted
with correct direction as shown.
with correct direction as shown.
Shield Tape
Connector assy 14P+20P
Datum
Use edge of UL tape
as guide line
as guide line
Sheet Core C
Wire from panel
Wire from panel
Click on the first or last page to see other KLV-20S400A service manuals if exist.