Read Sony KLV-20G400A Service Manual online
10
KLV-20G400A
KLV-20G400A
1-1. REAR COVER REMOVAL
SECTION 1: DISASSEMBLY
1 Remove 2 screws from top of Rear Cover, +BVTP 3X10
2 Remove 2 screws, +PSW M4X12
3 Remove 4 screws from Terminal area, +BVTP 3X10
4 Remove 2 screws, +PSW M4X12
5 Remove 2 screws, +PSW M4X12
6 Remove 8 screws from both sides of Rear Cover, -BVTP 4X12
2 Remove 2 screws, +PSW M4X12
3 Remove 4 screws from Terminal area, +BVTP 3X10
4 Remove 2 screws, +PSW M4X12
5 Remove 2 screws, +PSW M4X12
6 Remove 8 screws from both sides of Rear Cover, -BVTP 4X12
NOTE: The Vesa Brackets are not included in the Rear Cover Assembly. If you are replacing the
Rear Cover you must proceed to step 7.
Rear Cover you must proceed to step 7.
7 Remove 4 screws to detach the 2 Vesa Brackets from the Rear Cover. Save the screws and the brackets
and put them into the replacement Rear Cover.
1-2. FUNCTION
KEY
REMOVAL
1 Remove from Bezel
2 Release hooks
3 Disconnect one connector from the H1 Board.
2 Release hooks
3 Disconnect one connector from the H1 Board.
6
5
4
2
3
1
Rear Cover
Bezel
1
2
3
Key Cover
Function Key
H1 Board
Bezel
7
Rear Cover
Vesa Breacket
Click on the first or last page to see other KLV-20G400A service manuals if exist.