KLV-17HR3 - Sony TV Service Manual (repair manual). Page 8

 

The Auto Tuning menu appears on the screen. Press the OK 

button to select Yes.

The TV starts to automatically search and store all

 

available broadcast channels for you. 

 

This procedure could take some minutes. Please be  patient 

and do not press any buttons, otherwise automatic tuning 
will not be completed.

If no channels were found during the auto tune process, a 

message appears automatically on the screen asking you to 
connect the aerial. Check the aerial connection (refer to 
page 20). Press the OK button to restart the auto tuning 
process.

After all available channels are captured and stored,

 the 

Programme Sorting menu automatically appears

 

on the screen enabling you to change the order in

 

which the channels are stored.

If you wish to keep the broadcast channels in the tuned order, 

go to step 8.

If you wish to store the channels in a different order:

Press the

 v

 or 

V

 button to select the programme 

number with the channel (TV Broadcast) you wish

 

to move. Press the 

b

 button. 

Press the

 v

 or 

V

 button to select the new

programme number position for your selected channel 

(TV Broadcast). Press the OK button to store

The selected channel now moves to its new 

programme position and the other channels move 
accordingly.  

Repeat steps b)1 and b)2 if you wish to change 
the order of the other channels.

  

Press the MENU button to remove the menu from the screen

Auto tuning

Programmes found:

No channel found.

Please connect aerial

Confirm

Programme Sorting

Exit:

MENU

01
02
03
04
05
06
07
08
09
10
11

TVE
TVE2
TV3
C33
C27
C58
S02
S06
C44
C47
C48

Programme Sorting

Exit:

MENU

01
02
03
0

4

05
06
07
08
09
10
11

TVE
TVE2
TV3

C33

C27
C58
S02
S06
C44
C47
C48

01

TVE

Do you want to start

automatic tuning?

Yes

No

Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons 

on the Remote Control to operate the menu system: 

To switch on the menu screens:

Press the MENU button to switch the first level menu on.

Picture Adjustment

Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone

Select:

Set:

OK

End:

MENU

Personal
80
50
50
50
70

Auto
Normal

To navigate through the menus:

 To highlight and select the desired menu or option, press

 v

 or 

V

.

 To enter the selected menu or option, press 

b

.

 To return to the last menu or option, press 

B

.

 To alter the settings of your selected option, press 

v

/

V

/

B 

or 

b

.

 To confirm and store your selection, press  OK. 

To switch off the menu screens:

Press the MENU button to remove the menu from the  screen.