Read Sony KF-E42A10 / KF-E50A10 (serv.man7) Service Manual online
30
KF-E42A10/E50A10
KF-E42A10/E50A10
WIRE
DRESSING
BALLAST D.C. POWER CABLE ROUTING (1 OF 2)
1
2
Route Ballast DC power cable (p/n:1-910-015-27) BEHIND
Tab that holds pursleock on top of Duct Cover. Route
Cables along top of duct cover using edge of duct as a
guide for routing cable.
Route Cables along top of duct cover. At the end of the duct, make
sure the cables are routed BEHIND the corner edge of the duct. If the
cables are not routed behind corner ridge, the cables can get pinched
when the B-Block is installed.
3
4
Apply 20x50mm himelon tape (p/n:4-079-129-21) to cables. Use
ribs on Optical Block as guides for positioning tape. Cable
should be level (horizontally) when taping.
ESPECIFICACION DEL
LA PRUEBA:
LA PRUEBA:
Route Cables in purselocks on top of C-Shield case (p/n:3-
704-444-11).
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
Caution Points
Tool / Torque
Click on the first or last page to see other KF-E42A10 / KF-E50A10 (serv.man7) service manuals if exist.