Read Sony KF-E42A10 / KF-E50A10 (serv.man7) Service Manual online
24
KF-E42A10/E50A10
KF-E42A10/E50A10
1-12. LAMP DRIVER AND OPTICS UNIT BLOCK ASSEMBLY REMOVAL
Note: Remove the Lamp door and Lamp before removing the T1 Board or the S2 Board
(See “Replacing the Lamp” in the Appendix section of this service manual.)
2
Pull out duct block assembly
1
Screw (+BVTP 4x16)
Be careful not
to damage the
LVDS Cable
to damage the
LVDS Cable
3
2 Screws
(+BVTP 4x16)
HINT: Look for the screw
locator arrows on the bracket
locator arrows on the bracket
4Gently pull the Lamp Block
and Optical Block Assy out of
the cabinet
the cabinet
Gently turn the two assemblies
over onto a soft surface to
prevent damage to the lens assembly.
over onto a soft surface to
prevent damage to the lens assembly.
Silver Screw
6
Release cable
from purse lock
from purse lock
7
Use caution not to
damage the
Lamp Detection Switch
on the T2 Board
5
Click on the first or last page to see other KF-E42A10 / KF-E50A10 (serv.man7) service manuals if exist.